Model: IM4435G-VB.
Silkscreen: VBA2317.
Brand: VBsemi.
Parameters: P-channel, -30V, -7A, RDS(ON) 23mΩ @ 10V, 29mΩ @ 4.5V, 66mΩ @ 2.5V, 20Vgs (±V); -1.37Vth (V).
Package: SOP8.
.
Detailed parameter description and application introduction:.
1. Channel type: P-channel.
- This means that this is a P-channel MOSFET, which is usually used in applications that need to control negative voltage power supplies. .
.
2. Rated voltage (VDS): -30V.
- This is the maximum negative voltage that the channel MOSFET can withstand, indicating that it is suitable for circuits that need to handle voltages up to -30V. .
.
3. Rated Current (ID): -7A.
- This is the rated current of the trench MOSFET and indicates the maximum negative current load it can handle. .
.
4. Static Drain-Source Resistance (RDS(ON)): .
- RDS(ON) is the resistance of the trench MOSFET in the on state. At 10V, its resistance is 23mΩ, while at 4.5V it is 29mΩ and at 2.5V it is 66mΩ. This indicates that in the on state, its resistance is relatively low, which helps to reduce power consumption and heat. .
.
5. Gate-Source Voltage Rating (Vgs): 20V (±V).
- This indicates that the gate-source voltage is rated to be between plus and minus 20V. The gate-source voltage is used to control the on and off states of the MOSFET. .
.
6. Threshold Voltage (Vth): -1.37V.
- This is the threshold voltage of the channel MOSFET, which indicates the voltage that needs to be applied on the gate to make the device start to conduct. .
.
Application Introduction:.
This type of P-channel MOSFET is commonly used in various power management and switching applications, including but not limited to the following fields and modules:.
.
1. Power Switch: This MOSFET can be used in power switching modules such as DC-DC converters to achieve efficient power conversion. .
2. Battery Management: It can be used in battery protection circuits to control battery charging and discharging and prevent over-discharging. .
3. Power Inverter: In solar inverters and UPS (Uninterruptible Power Supply), P-channel MOSFET can be used to control the flow of power. .
4. Power Selection and Switching: It can be used in power selectors and power switches to switch between different power sources. .
.
In short, this type of P-channel MOSFET is suitable for electronic devices and modules in a variety of fields to meet the needs of power switching and power management, especially for applications that need to handle negative voltage power supplies.