Model: AOD486A-VB.
.
Silk screen: VBE1405.
.
Brand: VBsemi.
.
### Detailed parameter description:.
.
- **Package type:** TO252.
- **Channel type:** N-Channel.
- **Rated voltage (VDS):** 40V.
- **Maximum continuous current (ID):** 85A.
- **On-resistance (RDS(ON)):**.
- @ VGS = 10V: 4mΩ.
- @ VGS = 20V: No specific value is provided.
- **Threshold voltage (Vth):** 1.85V.
.
### Application introduction:.
.
AOD486A-VB is an N-Channel field effect transistor in a TO252 package. It is suitable for various power supply and power management applications, with low on-resistance and high rated current, making it excel in high-power applications. .
.
### Applicable fields and modules: .
.
1. **Power supply module:** Due to its high current and low on-resistance, AOD486A-VB can be used to design power supply modules to provide reliable power transmission and efficiency. .
.
2. **Motor drive:** In the field of motor drive, this transistor can be used to design motor control modules to achieve efficient motor operation. .
.
3. **Automotive electronics:** Due to its higher rated voltage and current capability, AOD486A-VB can be applied to automotive electronic systems such as electric vehicle power control unit (EV-PCU), etc. .
.
### Precautions for use: .
.
1. **Voltage rating:** Make sure to use it within the rated voltage range and do not exceed 40V. .
.
2. **Current limit:** Do not exceed the specified maximum continuous current, which is 85A. .
.
3. **Static protection:** During operation, take appropriate static protection measures to prevent damage to the transistor. .
.
4. **Heat dissipation:** In high power applications, provide sufficient heat dissipation to ensure the normal operating temperature of the transistor. .
.
5. **Application recommendations:** Refer to the application manual and recommendations provided by the manufacturer to ensure correct circuit design and use. .
.
Please note that this is only a basic overview, and the specific design and application needs to be carried out according to the specific project requirements and the manufacturer's recommendations. Before using the device, be sure to consult the relevant datasheet and technical documentation for detailed information and guidance.