中文
English
DMP2110UVTQ-13-VB Product details
Back to previous pageProduct introduction：
The VBsemi DMP2110UVTQ-13-VB is a Dual P+P Channel MOSFET manufactured using Trench technology, designed for medium and low voltage load switching and power management applications. Its SOT23-6 small package integrates two independent P-Channel MOSFETs in a limited space, effectively simplifying PCB layout and making it suitable for high-density portable devices. The device provides stable switching characteristics within a -20V drain-source voltage range, and its gate drive is compatible with common 2.5V/4.5V logic levels, facilitating direct system control.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | 100(mΩ) | 75(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | MOS |
Drain-Source Voltage (VDS): -20V
Gate-Source Voltage (VGS): ±12V
Threshold Voltage (Vth): Typical -0.6V
On-Resistance (VGS=2.5V): 100mΩ (Typical)
On-Resistance (VGS=4.5V): 75mΩ (Typical)
Maximum Drain Current (ID): -4A
Package: SOT23-6
Technology: Trench
Domain and module applications：
1. Portable Device Power Management: Used for load switches in power banks and handheld devices. The dual P-Channel configuration supports positive and negative power rail switching, and low on-resistance reduces power consumption, extending battery life.
2. Battery Protection Systems: Acts as the main switch for charging and discharging paths, working with a protection IC for fast overcurrent and overvoltage shutdown, ensuring cell safety. Suitable for dual-cell series or symmetrical charging/discharging topologies.
3. Load Switches and Power Path Selection: Enables on/off control of peripheral power supply in smart wearables and IoT modules. Supports direct drive by logic levels, simplifying MCU interface design.
4. Low-Voltage Motor Drive: Drives small DC brushed or brushless motors, suitable for fans, vibration motors, toy actuators. Supports PWM speed control with good dual-channel matching.
5. Consumer Electronics Control Units: Integrated into smart sockets, USB on/off circuits, audio amplifier power management for load access detection and power distribution.
6. DC-DC Converter Auxiliary Circuits: Used for synchronous rectification driver stages, reverse polarity protection, or dual-output voltage regulation, reducing rectification losses and adapting to compact Buck/Boost designs.
7. Automotive Auxiliary Power: Provides regulated power for infotainment, sensors, and other auxiliary loads in 12V automotive networks. The dual P-Channel can act as a high-side switch with strong negative voltage surge immunity.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
