中文
English
IPB180N10S4-03-VB Product details
Back to previous pageProduct introduction：
Are you designing a high-power motor drive or high-current power system, facing a 100V bus voltage and continuous load currents of tens of amperes? Ordinary MOSFETs either have excessive conduction losses or their packages struggle with heat dissipation. The VBsemi IPB180N10S4-03-VB is designed for this—it integrates a 100V withstand voltage, 250A current capability, and an ultra-low on-resistance of just 1.2mΩ into a robust TO263-7L package, allowing high power density designs without compromise.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO263-7L | Single-N | 100V | 3V | 250A | 1.2(mΩ) | SGT |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO263-7L | Single-N | SGT |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO263-7L | Single-N | 100V | 3V | 250A | SGT |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO263-7L | Single-N | 100V | 3V | 250A | SGT |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO263-7L | Single-N | MOS |
- Voltage: 100V, covering most industrial and automotive-grade bus applications
- Gate drive range: ±20V, compatible with various driver ICs and logic levels
- Threshold voltage: 3V, clear switching characteristics, stronger noise immunity
- On-resistance: 1.2mΩ (at 10V drive), minimal losses, significantly reduced temperature rise
- Maximum current: 250A, a true "workhorse" of power switches
- Utilizes SGT (Split Gate) technology, balancing low on-resistance and fast switching capability
Domain and module applications：
- Motor Drive / Drone ESCs – Used as three-phase full-bridge power switches, leveraging ultra-low on-resistance to reduce thermal losses, supporting higher current output and longer high-load operation.
- Automotive Power Systems / Onboard DC-DC – Withstands voltage fluctuations in 12V/24V automotive electrical systems, providing efficient and reliable switching paths for battery management and auxiliary power supplies.
- Server Power Supplies / Telecom Power – Replaces traditional Schottky diodes in synchronous rectification and Power Factor Correction (PFC) topologies, improving overall conversion efficiency and reducing thermal stress.
- Power Tools / High-Power Lithium Battery Protection Boards – Handles huge inrush currents during startup, the 250A current capability ensures stable on/off control, protecting battery cells with microsecond response times.
- Industrial Inverters / Welding Machines – High voltage rating and low on-resistance significantly reduce conduction losses, enhance system overload capability, and improve equipment reliability.
- Solar MPPT Controllers / Energy Storage Systems – Acts as the main switch, adapting to frequent switching and wide temperature ranges, minimizing energy loss and maximizing power generation efficiency.
One-sentence summary: The IPB180N10S4-03-VB is not an ordinary MOSFET; it is the "performance beast" and "efficiency cornerstone" for your high-current, high-voltage power conversion scenarios.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
