中文
English
IRLR024NTRL-VB Product details
Back to previous pageProduct introduction：
The IRLR024NTRL-VB is a Single N-MOS optimized for 60V medium-to-low voltage power switching applications. Using Trench technology, it combines low conduction loss with fast switching characteristics. The TO252 package achieves a good balance between heat dissipation capability and ease of installation. The combination of 60V withstand voltage, 18A current capability, and 73mΩ on-resistance makes it a reliable choice for DC-DC conversion, motor drive, and power management applications, especially suitable for industrial and consumer electronic systems with specific requirements for voltage margin and thermal performance.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | 85(mΩ) | 73(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | MOS |
VDS=60V: Suitable for 12V/24V/36V systems, providing ample voltage margin for spikes, significantly reducing avalanche breakdown risk.
VGS=±20V: Compatible with 5V~12V logic level drives, can be directly connected to MCU/PMIC or dedicated gate drivers, simplifying peripheral circuit design.
Vth=1.7V (typical): Moderate threshold voltage balances low-voltage turn-on capability with noise immunity, ensuring stable conduction over a wide temperature range.
RDS(on)=85mΩ @ VGS=4.5V / 73mΩ @ VGS=10V: Low on-resistance reduces conduction losses, controllable temperature rise at full load, can reduce heatsink or copper area requirements.
ID=18A: Ample continuous current margin to handle the startup surge and continuous operation requirements of most medium-power loads.
Package TO252: DPAK package with low thermal resistance and reliable soldering, suitable for automated assembly, and convenient for PCB layout and heat dissipation design.
Domain and module applications：
DC-DC Converters: In synchronous rectification or main switch applications, low on-resistance and low switching losses improve conversion efficiency, aiding power module miniaturization.
Battery Protection and Management: Fast switching characteristics and low internal resistance ensure reliable turn-off during overcurrent and short circuits, reducing self-heating of the protection board and extending battery life.
Motor Drive Control: Supports medium-to-low voltage PWM speed control, low switching losses, smoother motor operation, significantly improved controller temperature rise.
Power Tools and Vehicle Auxiliary Equipment: 60V withstand voltage combined with 18A current capability, suitable for 12V/24V power tools, vehicle water pumps, fans, and other loads.
LED Lighting Driver: Low dropout conduction characteristics reduce constant current losses, support multi-channel parallel connection, improving overall lamp efficiency and reliability.
Industrial Control Modules: Wide voltage margin and robust Trench technology, suitable for industrial electronics scenarios such as PLCs, sensor interfaces, and valve drives.
General Purpose Power Switches: Can serve as a cost-effective switching device for medium-power loads, simplifying system design and reducing BOM cost.
Selection Summary: The IRLR024NTRL-VB achieves an optimized balance between voltage rating, current capability, on-resistance, and package thermal performance. It is a high-reliability general-purpose choice for 60V medium-to-low voltage switching applications, particularly suitable for power, motor, and industrial control projects with high requirements for voltage margin, load capacity, and heat dissipation.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
