中文
English
SQD50P06-15L_GE3-VB Product details
Back to previous pageProduct introduction：
Are you designing a high-power battery management system or motor drive circuit, facing -60V bus voltage and load currents up to 50A? Ordinary P-channel MOSFETs either have excessive voltage drop or troublesome heat dissipation issues. The VBsemi SQD50P06-15L_GE3-VB is designed for this – it integrates -60V withstand voltage, -50A current capability, and an on-resistance of only 20mΩ in a TO252 package, allowing high-current P-channel switch designs without compromise.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -60V | -1.7V | -50A | 25(mΩ) | 20(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -60V | -1.7V | -50A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -60V | -1.7V | -50A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P | MOS |
- Voltage Rating -60V, covering most automotive and industrial negative voltage applications
- Gate Drive Range ±20V, compatible with a wide range of gate drive voltages
- Threshold Voltage -1.7V, reliable turn-on even with low-voltage logic
- On-Resistance 20mΩ (10V drive) / 25mΩ (4.5V drive), extremely low loss, less heat generation
- Maximum Current -50A, easily handles high current loads
- Uses Trench technology for excellent switching performance and stable on-state characteristics
Domain and module applications：
- Power Reverse Polarity Protection Circuit – Acts as a P-channel high-side switch, reducing voltage drop and improving system efficiency.
- Motor Drive Module – Used for DC brushed motors or small drone ESCs, enabling low-heat power switching control.
- Battery Charge/Discharge Management – Handles on/off switching of high-current paths in -48V telecom power supplies or power tool battery packs.
- Automotive Electronics – Meets the withstand voltage and surge immunity requirements of on-board low-voltage equipment, providing reliable protection.
- DC-DC Converter – In synchronous rectification or load switch topologies, its low on-resistance can replace Schottky diodes, reducing losses.
- Industrial Control / PLC Output Port – Acts as a high-side switch to drive relays or solenoid valves, supporting -60V bus environments.
In a nutshell: The SQD50P06-15L_GE3-VB is not an ordinary P-channel MOSFET; it is the "low-loss switch expert" and "reliability cornerstone" for your high-voltage, high-current P-channel applications.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
