中文
English
DMN3010LSS-13-VB Product details
Back to previous pageProduct introduction：
DMN3010LSS-13-VB is a Single N-MOS deeply optimized for low-voltage power switching scenarios. Using Trench technology, it achieves an excellent balance between on-resistance, switching speed, and reliability. The SOP8 package offers good heat dissipation capability and standard SMD compatibility, suitable for medium to high power density power supply and load management circuits. With a 30V withstand voltage, 13A continuous current capability, and an on-resistance as low as 8mΩ, it is a preferred alternative to traditional DPAK or larger package devices in 5V/12V/24V systems, effectively reducing board space and system cost while maintaining performance.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | 11(mΩ) | 8(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | MOS |
- VDS=30V: Suitable for 5V/12V/24V systems, providing sufficient voltage spike margin, reducing avalanche breakdown risk, and enhancing switching node reliability.
- VGS=±20V: Compatible with 1.8V~12V logic levels, can directly connect to MCU/PMIC or driver IC, eliminating level shifting circuits and simplifying design.
- Vth=1.7V (Typical): Can enter the fully on region under low-voltage drive conditions, supporting stable operation under battery voltage decay scenarios.
- RDS(on)=8mΩ @ VGS=10V, 11mΩ @ VGS=4.5V: Ultra-low on-resistance significantly reduces full-load losses, can reduce heat sink copper area, and improve system efficiency.
- ID=13A: Ample continuous current margin to handle peak or continuous current demands of portable devices, battery tools, and automotive auxiliary loads.
- Package SOP8: Standard small outline package with low parasitic parameters, supports higher frequency switching, and facilitates PCB layout and thermal design, balancing power and cost.
Domain and module applications：
- Portable Device Power Management: Low internal resistance improves boost/buck conversion efficiency, extends battery life, SOP8 package aids compact design.
- Battery Protection Module: Microsecond-level fast switching response ensures reliable turn-off during overcurrent/short circuit, low on-resistance reduces protection board self-heating, improving safety.
- Low-Voltage Motor Drive: Low PWM switching losses, smoother motor operation, significantly lower controller temperature rise, suitable for power tools and small fans.
- Consumer Electronics Control Module: Logic level direct drive simplifies peripheral circuits, suitable for smart sockets, USB charging switches, electronic locks, and other high-volume, low-cost products.
- LED Lighting Driver: Low on-state voltage drop reduces constant current source power consumption, supports multi-channel parallel connection, improving overall luminaire efficacy and reliability.
- DC-DC Converter: Replaces Schottky diodes in synchronous rectification applications, improving heavy-load efficiency by 2-3%, facilitating power module miniaturization.
- Automotive Auxiliary Power: 30V withstand voltage combined with a wide operating temperature range, suitable for 12V automotive bus, applicable to lighting, sensors, and infotainment system power supply.
Selection Summary: DMN3010LSS-13-VB achieves an ideal balance between on-resistance, continuous current capability, package compatibility, and system cost. It is a high-value universal choice for 30V low-voltage switching applications, especially suitable for projects with strict requirements on heat dissipation, efficiency, and PCB area.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
