中文
English
AP4412GM-VB Product details
Back to previous pageProduct introduction：
The VBsemi AP4412GM-VB is a Single N-channel field-effect transistor manufactured using Trench technology, designed for medium and low voltage power conversion and high-efficiency switching applications. Its SOP8 package strikes a good balance between thermal performance and board-level layout flexibility, making it suitable for medium to high-density PCB designs. The device provides stable switching characteristics within a 30V drain-source voltage range, and its gate drive is compatible with 4.5V and 10V logic levels, facilitating direct drive by various control circuits.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | 11(mΩ) | 8(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | 30V | 1.7V | 13A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOP8 | Single-N | MOS |
Drain-Source Voltage (VDS): 30V
Gate-Source Voltage (VGS): ±20V
Threshold Voltage (Vth): 1.7V (typical)
On-Resistance (VGS=4.5V): 11mΩ (typical)
On-Resistance (VGS=10V): 8mΩ (typical)
Maximum Drain Current (ID): 13A
Package: SOP8
Technology: Trench
Domain and module applications：
1. Portable Device Power Management: Used in power banks, handheld voltage regulator modules, and fast charging circuits, leveraging low on-resistance to improve conversion efficiency and extend battery life.
2. Battery Protection Systems: Serves as the main switch for charge/discharge paths, working with protection ICs to achieve fast overcurrent and overvoltage shutdown, ensuring cell safety.
3. Low-Voltage Motor Drive: Drives small DC brushless or brushed motors, suitable for fans, pumps, and automation actuators, supporting high-frequency PWM speed control.
4. Consumer Electronics Control Units: Integrated into smart sockets, USB on/off circuits, and power tool control boards for load detection and power distribution.
5. DC-DC Converters: Used for synchronous rectification or auxiliary switching to reduce rectification losses, suitable for compact Buck/Boost power supply designs.
6. Automotive Auxiliary Power Supplies: Provides regulated power for infotainment systems, sensors, and auxiliary loads in 12V vehicle networks, withstanding automotive electrical environment surges.
7. Power Adapters and Chargers: Acts as a low-side switch to optimize full-load and light-load efficiency, meeting energy-saving regulatory requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
