中文
English
NVTFS5124PLTAG-VB Product details
Back to previous pageProduct introduction：
The VBsemi NVTFS5124PLTAG-VB is a Single P-Channel field-effect transistor manufactured using Trench technology, specifically designed for negative voltage power management and high-side switch control scenarios. Its compact DFN8(3X3) package balances good thermal performance with a small footprint, suitable for high-density PCB designs. The device supports a -60V drain-source voltage, gate drive compatible with common 3.3V/5V logic levels, and features low on-resistance, helping to reduce losses and improve system efficiency.
File download
Download PDF document
Download now
.png)
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| DFN8(3X3) | Single-P | -60V | -2V | -5A | 140(mΩ) | 120(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| DFN8(3X3) | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| DFN8(3X3) | Single-P | -60V | -2V | -5A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| DFN8(3X3) | Single-P | -60V | -2V | -5A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| DFN8(3X3) | Single-P | MOS |
- Drain-Source Voltage (VDS): -60V
- Gate-Source Voltage (VGS): ±20V
- Threshold Voltage (Vth): -2.0V (typical)
- On-Resistance (VGS=4.5V): 140mΩ (typical)
- On-Resistance (VGS=10V): 120mΩ (typical)
- Maximum Drain Current (ID): -5A
- Package: DFN8(3X3)
- Technology: Trench
Domain and module applications：
1. High-Side Load Switch: Used for reverse polarity protection and load on/off control; P-channel architecture simplifies drive circuit design.
2. Battery Protection System: Acts as the main switch in negative voltage charge/discharge circuits, working with protection ICs for fast overcurrent/overvoltage shutdown.
3. Power Conversion Circuits: Suitable for auxiliary switches or load switches in Buck/Boost topologies, reducing conduction losses.
4. Automotive Electronic Control Units: Used for power management, relay replacement, and sensor power supply control in 12V/24V automotive networks.
5. Industrial Control Modules: Enables logic-level controlled power switching in systems like PLCs and servo drives.
6. LED Lighting Drivers: Used in negative voltage constant current or dimming circuits for stable output and current ripple suppression.
7. Consumer Electronics Power Management: Suitable for power path management in smart home appliances, power tools, etc., enhancing reliability.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
