中文
English
RJE0607JSP-VB Product details
Back to previous pageProduct introduction：
** Are you designing a power management circuit that requires negative voltage control, but struggling to find a suitable dual P-channel switch? Ordinary devices either lack sufficient voltage tolerance or have high conduction losses, while also taking up extra PCB space. VBsemi RJE0607JSP-VB is designed for this—it integrates -60V withstand voltage, -4A current capacity, and a low on-resistance of 120mΩ into a dual P+P architecture in an SOP8 package. One chip can replace two independent PMOS transistors, making high-side switches, load switching, and battery protection circuits simpler and more efficient.**
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOP8 | Dual-P+P | -60V | -1.9V | -4A | 145(mΩ) | 120(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Dual-P+P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Dual-P+P | -60V | -1.9V | -4A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOP8 | Dual-P+P | -60V | -1.9V | -4A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOP8 | Dual-P+P | MOS |
- Withstand voltage -60V, suitable for industrial and automotive high-side applications
- Gate drive range ±20V, compatible with a wide range of logic level drives
- Threshold voltage -1.9V, reliable turn-on with low-voltage control signals
- On-resistance 120mΩ (at 10V drive), 145mΩ (at 4.5V drive), lower losses
- Maximum current -4A, dual channels can be paralleled for higher current
- Trench process technology, fast switching speed, low switching losses
- SOP8 package, dual P+P integration, saves board space
**
Domain and module applications：
- **Battery Protection Board** – Dual P-channel structure suitable for positive high-side protection, quickly disconnects during overcurrent or short circuit to safeguard battery cells.
- **Load Switch/Power Management** – Used for system power on/off control, low on-resistance reduces voltage drop, improving power efficiency.
- **DC-DC Converter** – Acts as a high-side switch in synchronous buck or boost circuits, replacing dual PMOS discrete solutions to simplify design.
- **Motor Driver Module** – For forward/reverse control or braking of small DC motors, dual channels facilitate H-bridge topology.
- **Industrial Sensors/Instruments** – Withstands -60V voltage fluctuations, providing stable and reliable high-side switching for control loops.
- **Power Tools/Garden Equipment** – High voltage tolerance and low internal resistance adapt to harsh battery-powered environments.
- **Automotive Electronics** – Handles negative voltage transient shocks in vehicles, used for auxiliary power or lighting control.
**In a nutshell: The RJE0607JSP-VB is not just an ordinary dual PMOS transistor; it is your "dual-channel integration master" and "low-loss champion" for high-side power control design.**
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
