中文
English
PMPB29XPE-VB Product details
Back to previous pageProduct introduction：
The VBsemi PMPB29XPE-VB is a Single P-channel field-effect transistor using Trench technology, designed for low-voltage power management and efficient load switching scenarios. Its DFN6(2X2) small package combines good thermal dissipation with a compact layout advantage, suitable for space-constrained high-density PCB applications. The device provides stable switching characteristics within a -20V drain-source voltage range. The gate drive is compatible with common 2.5V/4.5V/10V logic levels, facilitating direct driving by MCUs or control ICs.
File download
Download PDF document
Download now
.png)
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| DFN6(2X2) | Single-P | -20V | -0.6V | -10A | 40(mΩ) | 28(mΩ) | 20(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| DFN6(2X2) | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| DFN6(2X2) | Single-P | -20V | -0.6V | -10A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| DFN6(2X2) | Single-P | -20V | -0.6V | -10A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| DFN6(2X2) | Single-P | MOS |
Drain-Source Voltage (VDS): -20V
Gate-Source Voltage (VGS): ±20V
Threshold Voltage (Vth): -0.6V (Typical)
On-Resistance: RDS(2.5V)=40mΩ, RDS(4.5V)=28mΩ, RDS(10V)=20mΩ (Typical)
Maximum Drain Current (ID): -10A
Package: DFN6(2X2)
Technology: Trench
Domain and module applications：
1. Portable Device Power Management: Used in power banks, handheld voltage regulation modules, utilizing low on-resistance to improve negative-side switching efficiency, extending battery life.
2. Battery Protection System: Acts as a high-side switch for charging/discharging paths, working with a protection IC for fast overcurrent and overvoltage shutdown, ensuring battery cell safety.
3. Load Switch: Suitable for various low-voltage domain power on/off control, such as peripheral power supply, USB power management, supporting direct logic level control.
4. Consumer Electronics Control Unit: Integrated into smart sockets, USB on/off circuits, for load detection and power distribution.
5. Low-Voltage Motor Drive: Drives small DC brushless or brushed motors, suitable for fans, pumps, and toy actuators, supporting PWM speed control.
6. DC-DC Converter: Used for point-of-load buck conversion or reverse polarity protection, reducing conduction losses, suitable for Buck/Boost miniaturization design.
7. Automotive Auxiliary Power: Provides regulated power supply or protection for auxiliary loads like infotainment and sensors in 12V automotive networks.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
