中文
English
MCP053P10Y-BP-VB Product details
Back to previous pageProduct introduction：
MCP053P10Y-BP-VB is a Single P-MOS deeply optimized for medium-to-high voltage power switching scenarios. The Trench process balances low switching losses and high reliability, while the TO220F fully plastic package achieves a good balance between thermal performance and insulation safety. The combination of -100V withstand voltage, -50A current capacity, and 33mΩ on-resistance makes it an ideal upgrade option to replace traditional DPAK or D2PAK packaged devices, especially suitable for industrial-grade applications with high requirements for heat dissipation and system reliability.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -50A | 37(mΩ) | 33(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -50A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -50A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-P |
- VDS=-100V: Suitable for 24V/36V/48V and higher voltage systems, provides ample margin for voltage spikes, reduces avalanche breakdown risk.
- VGS=±20V: Compatible with 3.3V~12V logic levels, can be directly connected to MCU/PMIC, simplifying driver circuit design.
- Vth=-2V (typical): Can be turned on at lower gate drive, suitable for scenarios with battery voltage fluctuations or limited drive capability.
- RDS(on)=33mΩ @ VGS=10V, 37mΩ @ VGS=4.5V: Ultra-low on-resistance, significantly reduces temperature rise at full load, allows smaller heatsink size.
- ID=-50A: Ample continuous current margin, can handle large current surge demands such as motor startup and power supply hot-swap.
- Package TO220F: Fully molded insulated design, no additional insulation pad required, easy installation, reliable thermal path, suitable for higher power applications.
Domain and module applications：
- Power Reverse Polarity Protection: Low internal resistance reduces voltage drop and power loss, -100V voltage capability covers various industrial bus voltages, making the protection circuit more reliable.
- Motor Drive Control: Low PWM switching losses result in smoother motor operation and significantly lower controller temperature rise, suitable for low-voltage servo systems below 48V.
- Battery Charge/Discharge Management: Fast switching characteristics improve charge/discharge efficiency, low on-resistance reduces self-heating of the protection board, extending battery life.
- Load Switch and Power Management System: Logic-level direct drive simplifies peripheral circuitry, suitable for power domain switching applications in servers and communication equipment.
- DC-DC Converter and Inverter: Replaces traditional P-MOS in synchronous rectification or auxiliary power paths, significantly improving heavy-load efficiency, facilitating module miniaturization.
- Vehicle and Industrial Control Systems: Wide safe operating area and -55~150°C operating temperature range, suitable for 12V/24V vehicle buses and harsh environments.
**Selection Summary:** The MCP053P10Y-BP-VB achieves an excellent balance between voltage margin, conduction loss, package reliability, and system cost, making it a cost-effective general-purpose choice for 100V-class P-channel power switching applications, especially suitable for projects with strict requirements on heat dissipation, insulation, and long lifespan.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
