FX30KMJ-2#B00-VB Product details
Product introduction:
File download
Download PDF document
Download now
Product parameter:
| VB Package | Configuration | VDS(V) | VGS | Vthyp(V) | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -23A | 120(mΩ) | 100(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp(V) | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -23A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp(V) | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-P | -100V | -2V | -23A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-P |
- Gate-Source Voltage (VGS): ±20V
- Threshold Voltage (Vth): -2V typical
- On-Resistance:
- VGS=10V: 100mΩ typical
- VGS=4.5V: 120mΩ typical
- Maximum Drain Current (ID): -23A
- Package: TO220F
- Technology: Trench
Domain and module applications:
1. **Negative Voltage Power Management**: Used for switching control, load on/off, and power conversion circuits on a -100V voltage rail, leveraging low on-resistance to reduce losses and improve system efficiency.
2. **Motor Drive Control**: Drives small DC brushed/brushless motors or industrial actuators, suitable for power tools, fans, pumps, etc., supporting PWM speed control and overcurrent protection.
3. **Battery Protection System**: Acts as the main switch on the negative side for charging/discharging, working with a protection IC for fast overcurrent and overvoltage shutdown, suitable for lithium battery packs and backup power management.
4. **Industrial Control Unit**: Integrated into power interfaces and power switch modules in PLCs, servo drives, and automation equipment, enhancing system immunity to shocks.
5. **LED Lighting Driver**: Used in high-voltage constant current or switching dimming circuits, stabilizing output current and suppressing flicker, suitable for commercial and outdoor lighting applications.
6. **DC-DC Converter**: Used as the main switch or synchronous rectifier in negative-voltage Buck/Boost or flyback topologies, reducing switching losses and suitable for miniaturized high-density power supply designs.
7. **Vehicle Auxiliary Power Supply**: Provides regulated power to negative-voltage loads in 12V/24V vehicle networks, suitable for infotainment, sensors, and automotive instrument systems.
Technical support:
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
中文
English
Back to previous page
Click for larger image