Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN6(2X2) |
Single-P |
-60V |
|
-1.7V |
-5A |
|
100(mΩ) |
85(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| DFN6(2X2) |
Single-P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| DFN6(2X2) |
Single-P |
-60V |
|
-1.7V |
-5A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| DFN6(2X2) |
Single-P |
-60V |
|
-1.7V |
-5A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| DFN6(2X2) |
Single-P |
|
|
|
|
|
|
|
VDS=-60V: Suitable for 12V/24V/48V systems, providing sufficient negative voltage spike margin to reduce avalanche breakdown risk.
VGS=±20V: Compatible with wide-range logic levels, can directly connect to MCU/PMIC, eliminating level-shifting circuits.
Vth=-1.7V (Typical): Allows full conduction even at low drive voltages, ideal for battery voltage decay scenarios.
RDS(on)=85mΩ @ VGS=10V: Low on-resistance significantly reduces full-load temperature rise, minimizing heat sink copper area.
RDS(on)=100mΩ @ VGS=4.5V: Maintains good conduction characteristics under low-voltage logic drive, supporting low-voltage control.
ID=-5A: Ample continuous current margin to handle peak demands of most portable and automotive auxiliary loads.
Package DFN6(2X2): Small size, low parasitic parameters, supports high-frequency switching, saving PCB area and assembly cost.
Domain and module applications：
Portable Device Power Management: Low on-resistance improves boost/buck efficiency, extends battery life, and small package aids ultra-thin design.
Battery Protection Module: Fast response ensures microsecond-level shutdown during overcurrent/short circuit, low on-resistance reduces self-heating of the protection board.
Low-Voltage Motor Drive: Low PWM switching losses result in smoother motor operation and significantly lower controller temperature rise.
Consumer Electronics Control Module: Logic-level direct drive simplifies peripheral circuits, suitable for high-volume, low-cost products like smart sockets and USB switches.
LED Lighting Drive: Low conduction voltage drop reduces constant current source power consumption, supports multi-channel parallel connection, improving overall light efficiency.
DC-DC Converter: Replaces Schottky diodes in synchronous rectification, improving heavy-load efficiency by 2~3%, facilitating module miniaturization.
Automotive Auxiliary Power: Voltage margin and wide operating temperature range adapt to 12V/24V automotive bus, high reliability. Selection Summary: DMP6250SFDFWQ-7-VB achieves a balance between performance margin, package size, and system cost, making it a cost-effective general-purpose choice for 60V low-voltage P-channel switch applications, especially suitable for projects with strict space and thermal requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
