Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN6(2X2) |
Single-P |
-20V |
|
-0.6V |
-10A |
40(mΩ) |
28(mΩ) |
20(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| DFN6(2X2) |
Single-P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| DFN6(2X2) |
Single-P |
-20V |
|
-0.6V |
-10A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| DFN6(2X2) |
Single-P |
-20V |
|
-0.6V |
-10A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| DFN6(2X2) |
Single-P |
|
|
|
|
|
|
|
VDS=-20V: Suitable for 3.7V/5V/12V batteries and low-voltage systems, providing ample negative voltage spike margin to reduce breakdown risk.
VGS=±20V: Compatible with 1.8V~12V logic levels, can directly connect to MCU/PMIC, eliminating level-shifting circuits.
Vth=-0.6V (Typical): Extremely low threshold voltage, fully turns on with low-voltage drive, ideal for battery voltage decay scenarios.
RDS(on)=20mΩ @ VGS=-10V: Ultra-low on-resistance, significantly reduces temperature rise under full load, minimizing required heat sink copper area.
ID=-10A: Ample continuous current margin, capable of handling peak demands of most portable and automotive auxiliary loads.
Package DFN6(2X2): Ultra-small size, low parasitic parameters, supports high-frequency switching while saving PCB area and assembly cost.
Domain and module applications：
Portable Device Power Management: Low Rds(on) improves load switch efficiency, extends battery life, ultra-small package enables ultra-thin design.
Battery Protection Module: Negative voltage fast response ensures microsecond shutdown during overcurrent/short circuit, low Rds(on) reduces self-heating of the protection board.
Low-Voltage Motor Drive: Low PWM switching loss, smoother motor operation, significantly lower controller temperature rise.
Consumer Electronics Control Module: Logic level direct drive simplifies peripherals, suitable for high-volume, low-cost products like smart wearables and USB switches.
LED Lighting Drive: Low conduction voltage drop reduces constant current source power loss, supports multi-channel parallel connection, improves overall luminaire efficacy.
DC-DC Converter: Synchronous rectification replaces Schottky diode on the negative side, improves heavy-load efficiency, facilitates module miniaturization.
Automotive Auxiliary Power: Voltage tolerance margin and wide operating temperature range adapt to automotive low-voltage buses, high reliability. Selection Summary: DMP2012UFDE-7-VB achieves a balance between performance margin, package size, and system cost. It is a cost-effective general-purpose choice for -20V low-voltage P-MOS switching applications, especially suitable for projects with strict space and thermal dissipation requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
