Product parameter:
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp(V) |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN6(2X2) |
Single-N |
60V |
|
1.76V |
14A |
|
|
19(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| DFN6(2X2) |
Single-N |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp(V) |
ID(A) |
Rds18 |
Technology |
| DFN6(2X2) |
Single-N |
60V |
|
1.76V |
14A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp(V) |
ID(A) |
Rds6 |
Technology |
| DFN6(2X2) |
Single-N |
60V |
|
1.76V |
14A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| DFN6(2X2) |
Single-N |
|
|
|
|
|
|
|
VDS=60V: Suitable for 12V/24V/48V systems, providing ample margin for voltage spikes, reducing avalanche breakdown risk.
VGS=±20V: Compatible with 4.5V~12V logic levels, can be directly connected to MCU/PMIC or gate driver circuits, simplifying design.
Vth=1.76V (Typical): Ensures full conduction even under low-voltage drive, suitable for battery voltage fluctuations and multi-level drive scenarios.
RDS(on)=19mΩ @ VGS=10V: Ultra-low on-resistance significantly reduces full-load temperature rise, allowing for smaller heat sink copper area or higher power density.
ID=14A: Ample continuous current margin to handle peak demands of most industrial and automotive auxiliary loads.
Package DFN6(2X2): Ultra-small footprint, low parasitic parameters, supports high-frequency switching, while saving PCB area and optimizing thermal path.
Domain and module applications:
DC-DC Converter: Replaces Schottky in synchronous rectification, improving heavy-load efficiency by 2~3%, with a 2X2 package facilitating power module miniaturization.
Battery Protection Module: Fast response ensures microsecond shutdown during overcurrent/short circuit, low on-resistance reduces self-heating of the protection board.
Low-Voltage Motor Drive: Low PWM switching loss, smoother motor operation, significantly reduced controller temperature rise.
Consumer Electronics Control Module: Logic-level direct drive simplifies peripherals, suitable for smart sockets, USB fast charging, power tools, and other high-volume, low-cost products.
LED Lighting Drive: Low on-state voltage drop reduces constant current source power consumption, supports multi-channel parallel connection, improving overall luminaire efficacy.
Communication Base Station/Server Power Supply: 60V voltage withstand adapts to Intermediate Bus Architecture (IBA), high current capability meets high power density on-board power requirements.
Automotive Auxiliary Power Supply: Voltage withstand margin and wide operating temperature range adapt to 12V/24V vehicle bus, high reliability. Selection Summary: The DMT6012LFDFQ-13-VB achieves a balance between performance margin, package size, and system cost, making it a cost-effective general-purpose choice for 60V medium/low-voltage switching applications, particularly suitable for projects with strict requirements on space, heat dissipation, and conversion efficiency.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support:
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours