Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN8(3X3) |
Single-P |
-60V |
|
-1.6V |
-11A |
|
75(mΩ) |
60(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| DFN8(3X3) |
Single-P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| DFN8(3X3) |
Single-P |
-60V |
|
-1.6V |
-11A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| DFN8(3X3) |
Single-P |
-60V |
|
-1.6V |
-11A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| DFN8(3X3) |
Single-P |
|
|
|
|
|
|
|
VDS=-60V: Suitable for 12V/24V/48V systems, providing ample negative voltage spike margin, reducing avalanche breakdown risk.
VGS=±20V: Compatible with a wide range of logic level drives, can directly connect to MCU/PMIC, eliminating the need for level shift circuits.
Vth=-1.6V (Typical): Can enter the fully enhanced region even at low drive voltages, especially suitable for battery voltage decay scenarios.
RDS(on)=60mΩ @ VGS=-10V (75mΩ @ VGS=-4.5V): Low on-resistance, significantly reduces full-load temperature rise, minimizing required heat sink copper area.
ID=-11A: Ample continuous current margin to meet peak demands of most portable, industrial control, and automotive auxiliary loads.
Package DFN8(3X3): Small size, low parasitic parameters, supports high-frequency switching, saves PCB area and assembly cost.
Domain and module applications：
Negative Voltage Power Management: Low internal resistance improves negative voltage buck-boost efficiency, small package enables compact power supply design.
Battery Protection Module: Fast response ensures microsecond shutdown during overcurrent/short circuit, low internal resistance reduces self-heating of the protection board.
Low-Voltage Motor Drive: Low PWM switching losses, smoother motor operation, significantly reduced controller temperature rise.
Consumer Electronics Control Module: Logic-level direct drive simplifies peripheral circuits, suitable for high-volume, low-cost products like smart switches and USB power management.
LED Lighting Driver: Low on-resistance reduces constant current source power loss, supports multi-channel parallel connection, improving overall light efficiency.
DC-DC Converter: Replaces Schottky diodes in synchronous rectification, improving heavy-load efficiency by 2-3%, facilitating module miniaturization.
Automotive Auxiliary Power Supply: Voltage margin and wide operating temperature range adapt to 12V/24V automotive bus, high reliability. Selection Summary: DMP6051SFVW-7-VB achieves a balance between performance margin, package size, and system cost, making it a cost-effective general-purpose choice for -60V medium-to-low voltage switch applications, especially suitable for projects with strict space and thermal requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
