中文
English
SPI11N60C3XKSA1-VB Product details
Back to previous pageProduct introduction：
VBsemi SPI11N60C3XKSA1-VB is a Single N-channel power MOSFET using SJ_Multi-EPI technology, designed for high-voltage power conversion and industrial-grade control scenarios. Its TO262 package offers good heat dissipation and through-hole mounting reliability, suitable for medium-to-high power supply systems. The device provides stable switching characteristics within a 650V drain-source voltage range, with a ±30V wide gate drive range, allowing flexible adaptation to various drive circuits and enhancing system design redundancy.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO262 | Single-N | 650V | 3.5V | 12A | 360(mΩ) | SJ_Multi-EPI |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO262 | Single-N | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO262 | Single-N | 650V | 3.5V | 12A | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO262 | Single-N | 650V | 3.5V | 12A | SJ_Multi-EPI |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO262 | Single-N |
Drain-Source Voltage (VDS): 650V
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V (Typical)
On-Resistance (VGS=10V): 360mΩ (Typical)
Maximum Drain Current (ID): 12A
Package: TO262
Technology: SJ_Multi-EPI
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V (Typical)
On-Resistance (VGS=10V): 360mΩ (Typical)
Maximum Drain Current (ID): 12A
Package: TO262
Technology: SJ_Multi-EPI
Domain and module applications：
1. High-Voltage Switching Power Supplies: Used as the main switch tube in AC-DC converters, leveraging low conduction losses and high withstand voltage to improve power conversion efficiency and reliability.
2. Photovoltaic Inverters: Performs high-frequency switching functions in the DC-side boost or inverter bridge arm, suitable for residential and small commercial photovoltaic systems.
3. Industrial Motor Drives: Drives three-phase asynchronous motors or permanent magnet synchronous motors, suitable for frequency converters, servo drives, and pump loads, supporting PWM speed regulation.
4. Uninterruptible Power Supplies (UPS): Acts as a power switch in the rectifier/inverter stage, ensuring the continuity and stability of load power supply during mains abnormalities.
5. Electric Vehicle Charging Pile Auxiliary Power Supplies: Used in high-voltage auxiliary circuits and DC-DC conversion modules, meeting wide voltage input and efficient energy conversion requirements.
6. Power Electronic Transformers: Applied in medium and high-voltage power conversion units, leveraging the superjunction process's low losses and strong avalanche resistance to improve system power density.
7. Industrial Control and Automation Equipment: Integrated into the auxiliary power supply and power output stage of PLCs, servo controllers, and other products, enhancing system impact resistance.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
