Featured Model

Last updated:

2SJ143(1)-S6-AZ-VB Product details

Product introduction:

VBsemi 2SJ143(1)-S6-AZ-VB is a Single P-Channel power MOSFET using Trench technology, designed for medium and high-voltage load switching, power conversion, and motor control applications. Its TO220F fully plastic package provides good insulation and heat dissipation, facilitating installation and thermal management, suitable for industrial control, communication power supplies, and consumer electronics. The device offers stable and reliable switching characteristics within a -60V drain-source voltage range, and the gate drive is compatible with common logic levels to simplify system design.

File download

Download PDF document
Download now

Product parameter:

VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds2.5 Rds4.5 Rds10 Technology
TO220F Single-P -60V -1.7V -20A 120(mΩ) 100(mΩ) Trench
VB Package Configuration VCE VGE VGEth(V) VCEsat15V ICE Technology
TO220F Single-P Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds18 Technology
TO220F Single-P -60V -1.7V -20A Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds6 Technology
TO220F Single-P -60V -1.7V -20A Trench
VB Package Polarity Vz / VR Pd VF IF IR Cd Type
TO220F Single-P
- Drain-Source Voltage (VDS): -60V
- Gate-Source Voltage (VGS): ±20V
- Threshold Voltage (Vth): -1.7V (Typical)
- On-Resistance (VGS=4.5V): 120mΩ (Typical)
- On-Resistance (VGS=10V): 100mΩ (Typical)
- Maximum Drain Current (ID): -20A
- Package: TO220F
- Technology: Trench

Domain and module applications:



Application Areas and Modules
1. Power Reverse Connection Protection: Used in anti-reverse connection circuits at DC power input, utilizing low on-voltage drop to reduce power loss and improve system reliability.
2. Load Switch: Acts as a high-side or low-side power switch to control load on/off, suitable for industrial equipment, communication base stations, and battery-powered systems.
3. DC-DC Converter: Suitable for power switches or synchronous rectifier tubes in Buck/Boost topologies, reducing switching losses and improving conversion efficiency.
4. Motor Drive: Drives medium and low power DC brushed or brushless motors, supports PWM speed control, applied in fans, pumps, power tools, and robot actuators.
5. Battery Charge and Discharge Management: Used as the main switch in the charging/discharging circuit, works with protection circuits to achieve fast overcurrent and overvoltage shutdown, ensuring lithium battery pack safety.
6. Automotive Electronic Systems: Provides regulated power supply and power switching for loads such as lights, sensors, and infotainment systems in 12V/24V vehicle networks.
7. Industrial Control Modules: Integrated into PLCs, inverter auxiliary power supplies, and servo drive control boards to achieve stable power management and signal isolation.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features

Technical support:

* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours

Sample Req

QQ

Telephone

400-655-8788

WeChat

WeChat

Topping

Sample Req
Online
Telephone
WeChat