中文
English
TK080A60Z1,S4X-VB Product details
Back to previous pageProduct introduction：
Are you designing a high-power-density switching power supply that needs to handle a 600V high-voltage bus while minimizing losses and temperature rise? Ordinary high-voltage MOSFETs either have high on-resistance or demanding drive requirements. VBsemi TK080A60Z1,S4X-VB is designed for this—it uses SJ_Multi-EPI superjunction technology to integrate 600V voltage tolerance, 31A high current handling capability, and an ultra-low on-resistance of only 90mΩ into a TO220F fully isolated package, enabling high-efficiency, high-reliability high-voltage switching designs without compromise.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 31A | 90(mΩ) | SJ_Multi-EPI |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 31A | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 31A | SJ_Multi-EPI |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N |
Voltage Rating 600V, confidently handles high voltage applications
Gate Drive Range ±30V, compatible with various drive circuits
Threshold Voltage 3.5V, clear and controllable turn-on state
On-Resistance 90mΩ (at 10V Drive), significantly reduced conduction loss
Maximum Current 31A, ample for high power output
Package TO220F, fully molded insulation, convenient heat dissipation without extra insulation pads
Technology SJ_Multi-EPI, low loss, high surge withstand, suitable for hard and soft switching topologies
Domain and module applications：
Switching Power Supply / Charging Pile Module – Acts as a high-voltage power switch, using low on-resistance and high withstand voltage to improve overall efficiency and reduce heat sink costs.
PFC Power Factor Correction Circuit – Operates stably in continuous conduction mode, reducing switching losses and improving power factor.
Inverter and Motor Drive – Withstands bus voltage fluctuations, providing reliable high-speed switching control for high-power motors.
Industrial Control Auxiliary Power Supply – Remains stable in wide voltage input environments, providing a clean, reliable power stage for the control board.
Photovoltaic Inverter DC-DC Boost – Utilizes 600V withstand voltage and 31A current carrying capacity to efficiently complete the conversion from photovoltaic panel to bus voltage.
Adapter / Charger Synchronous Rectification – Replaces high-voltage diodes, reducing conduction voltage drop, improving conversion efficiency by 2-3%.
UPS Uninterruptible Power Supply – Withstands transient high-voltage surges during battery inversion and bypass switching, ensuring critical loads remain powered. One sentence summary: The TK080A60Z1,S4X-VB is not an ordinary high-voltage MOS tube; it is the 'energy efficiency cornerstone' and 'power guardian' of your high-voltage power system.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
