中文
English
IPA60R210CFD7XKSA1-VB Product details
Back to previous pageProduct introduction：
VBsemi IPA60R210CFD7XKSA1-VB is a Single N-channel field-effect transistor using SJ_Multi-EPI technology, designed for high-voltage power conversion and industrial-grade control scenarios. Its TO220F fully isolated package provides good heat dissipation performance and installation convenience, suitable for circuit layouts with high voltage and high power density. The device maintains stable switching characteristics within a 600V drain-source voltage range, with sufficient voltage margin, and combined with low on-resistance and high current capability, it can effectively reduce system losses and improve reliability.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 20A | 175(mΩ) | SJ_Multi-EPI |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 20A | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 600V | 3.5V | 20A | SJ_Multi-EPI |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N |
Drain-Source Voltage (VDS): 600V
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V Typical
On-Resistance (VGS=10V): 175mΩ (Typical)
Maximum Drain Current (ID): 20A
Package Type: TO220F
Process Technology: SJ_Multi-EPI
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V Typical
On-Resistance (VGS=10V): 175mΩ (Typical)
Maximum Drain Current (ID): 20A
Package Type: TO220F
Process Technology: SJ_Multi-EPI
Domain and module applications：
1. Switching Power Supply (SMPS): Used as the main switching transistor in high-voltage DC-DC converters, flyback and forward topologies, utilizing low on-resistance and fast switching characteristics to improve conversion efficiency and reduce temperature rise.
2. Adapters and Chargers: Applied to the primary side of high-power adapters for laptops and industrial equipment, withstanding high input voltage and ensuring stable power output.
3. LED Lighting Driver: Suitable for high-voltage constant current drive circuits, providing reliable on-off control, supporting wide voltage input, improving dimming performance and lamp life.
4. Photovoltaic Inverters: Used for front-end boost or bridge arm switching in DC-AC inverters, leveraging high voltage withstand and low loss characteristics to improve energy utilization of solar power generation systems.
5. Motor Drive: Drives high-voltage industrial motors, pumps, and fans, achieving efficient operation with PWM speed regulation, enhancing system overcurrent tolerance.
6. Auxiliary Power Supply and High-Voltage Bus Switch: Used for auxiliary power supply or high-side load switching in industrial control, power instruments, etc., achieving safe and stable power management.
7. Electric Vehicle Charging (Off-Board) and Energy Storage Systems: Applied to high-voltage switching circuits in charging modules, adapting to harsh electrical stresses, extending system service life.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
