中文
English
2SK4087LS-MG5-VB Product details
Back to previous pageProduct introduction：
VBsemi 2SK4087LS-MG5-VB is a Single N-channel power field effect transistor using planar technology (Planar), designed for high-voltage power conversion and industrial-grade power control scenarios. Its TO220F fully insulated package offers excellent heat dissipation and electrical isolation performance, simplifying installation and system thermal design. The device provides stable and reliable switching characteristics within a 650V drain-source voltage range, suitable for high-voltage, medium-power switching power supplies and inverter circuits, meeting stringent industrial application requirements.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 650V | 3.5V | 16A | 480(mΩ) | Planar |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | Planar |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 650V | 3.5V | 16A | Planar |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 650V | 3.5V | 16A | Planar |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N |
Drain-Source Voltage (VDS): 650V
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V (Typical)
On-Resistance (VGS=10V): 480mΩ (Typical)
Maximum Drain Current (ID): 16A
Package: TO220F
Technology: Planar
Gate-Source Voltage (VGS): ±30V
Threshold Voltage (Vth): 3.5V (Typical)
On-Resistance (VGS=10V): 480mΩ (Typical)
Maximum Drain Current (ID): 16A
Package: TO220F
Technology: Planar
Domain and module applications：
1. Switching Power Supply (SMPS): Used as the main switch in high-voltage DC-DC converters, flyback or forward topologies, achieving efficient power conversion, suitable for industrial power supplies and communication equipment power supply modules.
2. Photovoltaic Inverters: As a boost and inverter stage power switch in grid-tied or off-grid photovoltaic systems, supporting stable high-voltage bus transmission and improving system conversion efficiency.
3. Motor Drive Control: Drives high-voltage AC motors or brushless DC motors, suitable for industrial inverters, water pumps, fans, and other equipment, supporting high-frequency PWM speed control.
4. High-Voltage Battery Management System: Used in the charge/discharge circuit of energy storage systems and electric vehicle auxiliary power supplies, achieving fast overvoltage and overcurrent protection to ensure battery pack safety.
5. Power Electronics Auxiliary Power Supply: As an auxiliary switch tube for wide voltage input auxiliary power circuits, providing stable and reliable primary side control capability.
6. Industrial Automation Equipment: Integrated into programmable logic controller (PLC) output modules and industrial sensor drive circuits, meeting high withstand voltage and stable switching requirements.
7. Charging Pile Power Module: Applied in the power factor correction (PFC) and DC-DC conversion stages inside electric vehicle charging piles, supporting high-frequency hard switching or soft switching operation.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
