Featured Model

Last updated:

RX2G10BBGC7G-VB Product details

Product introduction:

VBsemi RX2G10BBGC7G-VB is a Single N-Channel power MOSFET using Trench technology, designed for high-current, medium to low voltage power conversion and high power density control scenarios. Its TO220F package offers good heat dissipation and insulation properties, facilitating easy installation on heat sinks or in power modules, suitable for demanding applications like industrial power supplies, energy storage systems, and power tools. The device provides extremely low on-resistance within a 40V drain-source voltage range, supporting 200A-level high current transmission, significantly reducing conduction losses and improving overall system efficiency.

File download

Download PDF document
Download now

Product parameter:

VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds2.5 Rds4.5 Rds10 Technology
TO220F Single-N 40V 3V 200A 2(mΩ) 1.4(mΩ) Trench
VB Package Configuration VCE VGE VGEth(V) VCEsat15V ICE Technology
TO220F Single-N Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds18 Technology
TO220F Single-N 40V 3V 200A Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds6 Technology
TO220F Single-N 40V 3V 200A Trench
VB Package Polarity Vz / VR Pd VF IF IR Cd Type
TO220F Single-N
- Drain-Source Voltage (VDS): 40V
- Gate-Source Voltage (VGS): ±20V
- Threshold Voltage (Vth): 3V (Typical)
- On-Resistance (VGS=4.5V): 2 mΩ (Typical)
- On-Resistance (VGS=10V): 1.4 mΩ (Typical)
- Maximum Drain Current (ID): 200A
- Package Type: TO220F
- Technology: Trench

Domain and module applications:


1. High-Power DC-DC Converter: Used in synchronous rectification stage or as main switch, utilizing 1.4mΩ ultra-low on-resistance to significantly reduce rectification loss, suitable for high-current Buck/Boost topologies.
2. Energy Storage and Battery Management System: Acts as the main power switch in charge/discharge circuits, working with protection circuits for fast overcurrent and overvoltage cutoff, meeting the high reliability requirements of power battery packs and energy storage cabinets.
3. Motor Drive and Industrial Control: Drives high-power DC brushless motors, servo motors, and power tools, supports high-frequency PWM speed regulation, improving dynamic response and operating efficiency.
4. Vehicle Power Supply and Electrical Systems: Suitable for power conversion, electric heating control, and auxiliary load power supply in 12V/24V vehicle networks, handling high surge current impacts.
5. Server and Communication Power Supplies: Used in high-efficiency rectifier modules, hot-swap circuits, and point-of-load (POL) power supplies, reducing power stage temperature rise and increasing power density.
6. Power Tools and Garden Machinery: Provides high-current switching paths for cordless drills, chainsaws, lawn mowers, etc., enhancing continuous output capability and overload tolerance.
7. Inverters and UPS Systems: Acts as a low-voltage side high-frequency switching device, improving conversion efficiency, suitable for backup power, photovoltaic energy storage inverters, and welding equipment.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features

Technical support:

* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours

Sample Req

QQ

Telephone

400-655-8788

WeChat

WeChat

Topping

Sample Req
Online
Telephone
WeChat