You are designing a high-power DC-DC converter or motor driver, and the system needs to withstand transient currents of up to 180A while minimizing conduction losses. Ordinary MOS transistors either lack sufficient current capacity or have too high on-resistance, leading to bulky heatsinks and substandard efficiency. VBsemi IPP030N10NF2SAKMA1-VB is designed for this—it integrates 100V withstand voltage, 180A high current carrying capacity, and an ultra-low on-resistance of only 3mΩ in a TO220 package, allowing high-power power supply designs to no longer compromise on heat dissipation and space.
- Voltage Rating 100V, covering 48V systems and 80V bus applications, with ample safety margin - Gate Drive Range ±20V, compatible with various PWM drive circuits - Threshold Voltage 3V, clear switching characteristics, strong anti-interference capability - On-Resistance 3mΩ (at 10V drive), negligible loss under high current - Maximum Current 180A, leading among same-spec packages, unleashing extreme power density - Trench Technology, excellent switching performance, lower on-resistance
Domain and module applications：
- High-power DC-DC converters – Used as synchronous rectifiers or main switches, significantly reducing conduction losses and improving overall efficiency. - Motor drive controllers – Suitable for high-current scenarios such as power tools and e-bikes, enabling smooth high-torque output. - Server power supplies / Telecom power supplies – Handling high power within limited PCB space, simplifying thermal design and improving reliability. - UPS uninterruptible power supplies – Handling high-current switching in the inverter stage with ample voltage margin, ensuring stable power supply to critical loads. - Battery energy storage systems (BESS) – Used for charge/discharge circuit switching, low internal resistance generates less heat, extending system lifespan. - Automotive electronic auxiliary power supplies – Handling voltage fluctuations in 12V/24V and even 48V electrical systems, providing efficient power paths. - Lithium battery protection boards / High-power BMS – Quickly cutting off overcurrent or short circuits, safeguarding cell safety with 3mΩ internal resistance. One-sentence summary: The IPP030N10NF2SAKMA1-VB is not an ordinary MOS tube; it is the ultimate choice for achieving both “low loss” and “high current capacity” in your high-power designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
*To request free samples, please complete and submit the following information. Our team will review your application within 24 hours and arrange shipment upon approval. Thank you!
X
SN Check
***Serial Number Lookup Prompt**
1. Enter the complete serial number, including all letters and numbers.
2. Click Submit to proceed with verification.
The system will verify the validity of the serial number and its corresponding product information to help you confirm its authenticity.
If you notice any inconsistencies or have any questions, please immediately contact our customer service team. You can also call 400-655-8788 for manual verification to ensure that the product you purchased is authentic.
Download now
中文
English
Back to previous page
