Are you designing a high-power DC-DC converter where the input current easily exceeds 100A, and the copper on the PCB is heating up? Ordinary MOSFETs either suffer from high conduction losses or have limited thermal dissipation due to their package. VBsemi NVMFS5C450NET1G-YE-VB is designed for this—it integrates 40V withstand voltage, 150A current capability, and a low on-resistance of just 1.09mΩ into a compact DFN8(5X6) package. Combined with SGT super trench technology, it eliminates concerns over losses and temperature rise in high-current power designs.
- Voltage 40V, covering mainstream low-voltage systems like 12V/24V, with ample safety margin - Gate drive range ±20V, compatible with multiple drive voltages, strong adaptability - Threshold voltage 3V, clear switching characteristics, excellent noise immunity - On-resistance 1.09mΩ (at 10V drive), reducing losses by an order of magnitude compared to standard MOS transistors - Maximum current 150A, DFN8 large pad package, lower thermal resistance, strong continuous output capability - Utilizes SGT technology, excellent figure of merit (FOM), achieving an ideal balance between switching speed and conduction losses
Domain and module applications：
- **High-power synchronous rectification Buck/Boost modules** – As a rectifier or main switch, extremely low on-resistance significantly improves conversion efficiency, reducing heatsink size. - **Power tool/drone ESCs** – 150A high current capability easily handles stall and transient surges; SGT technology ensures high efficiency even under high-frequency PWM. - **Automotive electronics/Body control modules** – 40V withstand voltage compatible with 12V/24V vehicle systems, withstands load dump voltage fluctuations, providing reliable switching for high-power loads like motors and heaters. - **Server power supplies/Communication power supplies** – In 1V-ish low-voltage, high-current output stages, 1.09mΩ on-resistance means lower conduction voltage drop and less power loss. - **Battery/Energy storage systems (BMS)** – Supports charge/discharge circuits up to 150A; microsecond switching characteristics combined with protection logic quickly interrupt fault current. - **Motor drives/Industrial control** – DFN8(5X6) package with bottom thermal pad, suitable for high power density designs, adapting to harsh industrial environments. **In a nutshell:** The NVMFS5C450NET1G-YE-VB is not an ordinary MOSFET; it is the "low-resistance tool" and "power heart" for your high-current, high-efficiency power designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
*To request free samples, please complete and submit the following information. Our team will review your application within 24 hours and arrange shipment upon approval. Thank you!
X
SN Check
***Serial Number Lookup Prompt**
1. Enter the complete serial number, including all letters and numbers.
2. Click Submit to proceed with verification.
The system will verify the validity of the serial number and its corresponding product information to help you confirm its authenticity.
If you notice any inconsistencies or have any questions, please immediately contact our customer service team. You can also call 400-655-8788 for manual verification to ensure that the product you purchased is authentic.
Download now
中文
English
Back to previous page.png)
