Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN8(5X6) |
Single-N |
30V |
|
1.7V |
45A |
7.4(mΩ) |
5.3(mΩ) |
4.4(mΩ) |
SGT |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| DFN8(5X6) |
Single-N |
|
|
|
|
|
SGT |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| DFN8(5X6) |
Single-N |
30V |
|
1.7V |
45A |
|
SGT |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| DFN8(5X6) |
Single-N |
30V |
|
1.7V |
45A |
|
SGT |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| DFN8(5X6) |
Single-N |
|
|
|
|
|
|
|
Drain-Source Voltage (VDS): 30V
Gate-Source Voltage (VGS): ±20V
Threshold Voltage (Vth): 1.7V typical
On-Resistance (VGS=2.5V): 7.4 mΩ (typical)
On-Resistance (VGS=4.5V): 5.3 mΩ (typical)
On-Resistance (VGS=10V): 4.4 mΩ (typical)
Maximum Drain Current (ID): 45A
Package Type: DFN8(5X6)
Process Technology: SGT
Domain and module applications：
1. High-Efficiency DC-DC Converters: Used in synchronous rectification Buck/Boost circuits, leveraging extremely low on-resistance to significantly reduce losses and improve power conversion efficiency.
2. Motor Drive Control: Drives low-voltage DC brushless or brushed motors, supports high current and high-frequency PWM speed control, suitable for power tools, robots, and pump applications.
3. Battery Protection Systems: Acts as the main switch for the charge/discharge loop, working with protection ICs to achieve fast overcurrent and overvoltage shutdown, meeting high-rate lithium battery application needs.
4. Server and Communication Power Supplies: Used in VRM, POL modules, and board-level power supply, adapting to high current density and strict thermal management scenarios.
5. Power Tools and Industrial Control: Provides low-heat switching solutions for high-power loads, improving continuous operation reliability.
6. Automotive Auxiliary Systems: Applied in load switches, LED drives, and actuator control within 12V/24V vehicle networks, meeting wide temperature and vibration resistance requirements.
7. Power Load Switches: Used for hot-swap, power path management, and intelligent power distribution, achieving low voltage drop and high current carrying capacity.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
