Product introduction：
VBsemi NTMFS4C027NAT1G-VB is a Single N-Channel MOSFET using SGT technology, designed for medium-to-low voltage, high-current power conversion and high power density control scenarios. Its DFN8(5X6) package offers excellent heat dissipation and low parasitic parameters, suitable for applications such as power modules, motor drives, and battery protection that require high thermal performance and reliability. The device provides extremely low on-resistance and high continuous drain current capability within a 30V drain-source voltage range, and its gate drive is compatible with common 3.3V/5V logic levels, facilitating system integration and fast switching control.
File download
Domain and module applications：
1. High-Efficiency DC-DC Converters: Used in synchronous rectification Buck/Boost circuits. The 4mΩ ultra-low on-resistance significantly reduces conduction losses, suitable for server power supplies, telecom power supplies, and onboard power modules.
2. Motor Drive Control: Drives low-voltage DC brushless or brushed motors, suitable for power tools, robots, cooling fans, and pump loads, supporting high-frequency PWM speed control for improved dynamic response.
3. Battery Protection and Management Systems: Acts as the main switch for charge/discharge loops, working with protection ICs for fast overcurrent, overvoltage, and short-circuit shutdown, meeting high current demands of power tools, e-bikes, and energy storage battery packs.
4. Automotive 12V/24V Power Systems: Used for automotive DC-DC converters, LED lighting drivers, and auxiliary load power supplies. Low on-resistance and strong surge immunity ensure stable operation in harsh environments.
5. High-Power Load Switches: Applied in server hard drive backplanes, telecom equipment hot-swap circuits, and industrial control units for low-power on/off switching and load isolation.
6. Low-Voltage High-Current Power Distribution: Used in portable device fast charging protocol boards, Type-C power output, and smart sockets, supporting high-density current transmission and reducing temperature rise.
7. Photovoltaic Micro-Inverters and Power Optimizers: Used in MPPT circuits and inverter bridge arms. The low gate charge characteristic of SGT technology increases switching frequency, reducing magnetic component size.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
