中文
English
NTMJS1D2N04CLTWG-VB Product details
Back to previous pageProduct introduction：
You are designing a high-power-density, high-current power module with limited PCB space, yet needing to handle hundreds of amperes of current. Ordinary MOSFETs either have high conduction voltage drop causing severe heat, or are too large in package making layout difficult. VBsemi NTMJS1D2N04CLTGWB-VB is designed for this—it combines a 40V withstand voltage, 150A current-carrying capacity, and an ultra-low on-resistance of only 0.7mΩ in an advanced LFPAK56 package. With SGT (Split Gate Trench) technology, it frees high-power conversion design from the dual challenges of heat dissipation and space constraints.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| LFPAK56 | Single-N | 40V | 3V | 150A | 0.7(mΩ) | SGT |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| LFPAK56 | Single-N | SGT |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| LFPAK56 | Single-N | 40V | 3V | 150A | SGT |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| LFPAK56 | Single-N | 40V | 3V | 150A | SGT |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| LFPAK56 | Single-N |
- Drain-Source Voltage 40V, ensuring safety margin for low-voltage high-current applications
- Gate Drive Range ±20V, compatible with 4.5V~12V drive logic
- Threshold Voltage 3V, clear switching characteristics, strong anti-interference capability
- On-Resistance 0.7mΩ (at 10V drive), extremely low conduction loss, excellent efficiency
- Maximum Current 150A, small package delivers impressive current handling capacity
- SGT Technology, optimized switching speed and FOM figure of merit
Domain and module applications：
- **High-Current DC-DC Buck Modules** – Acts as the synchronous rectification low-side switch, significantly reducing conduction losses and improving conversion efficiency, suitable for server power supplies and telecom equipment power.
- **Power Tools/Brushless Motor Drive** – Leverages 150A high current capability and low thermal resistance package to handle locked-rotor and transient overloads, ensuring stable motor controller operation.
- **Automotive 12V/48V Power Systems** – 40V voltage rating combined with low on-resistance, suitable for on-board DC-DC, battery management, and motor control, withstanding automotive electrical system surges.
- **Lithium Battery Protection Boards** – Quickly cuts off the main circuit during overcurrent or short circuit, ultra-low on-resistance reduces heat buildup during charge/discharge, extending battery pack lifespan.
- **Energy Storage Inverters/BMS** – Used in high-power charge/discharge circuits, SGT technology provides excellent switching waveforms, reducing EMI and switching stress.
- **Load Switches/Hot-Swap Circuits** – Enables safe switching of high-current loads, LFPAK56 package facilitates PCB thermal design, improving system reliability. **One-sentence summary: NTMJS1D2N04CLTGWB-VB is not an ordinary MOSFET; it is the "low-resistance king" and "efficiency engine" in your high-current, high-density power supply design.**
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
