中文
English
TJ80S04M3L(T6L1,NQ-VB Product details
Back to previous pageProduct introduction：
Imagine this: You are designing a high-power motor driver board, facing a 40V bus voltage and nearly 90A of surge current. Ordinary P-channel MOS transistors either lack sufficient voltage withstand capability or have conduction losses so high that the heatsink becomes 'overwhelmed'. The VBsemi TJ80S04M3L is designed for precisely this scenario—it integrates -40V withstand voltage, -90A current carrying capacity, and an on-resistance of only 6.8mΩ into a TO252 package, allowing high-current P-channel applications to no longer require 'detours' through N-channel plus complex drive circuits.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -40V | -2V | -90A | 13(mΩ) | 6.8(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -40V | -2V | -90A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -40V | -2V | -90A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P |
Gate Drive Range ±20V, compatible with wide drive signal range, strong anti-interference capability
Threshold Voltage -2V, medium threshold design, stable switching characteristics
On-Resistance 6.8mΩ (at 10V Drive), 13mΩ (at 4.5V Drive), extremely low loss
Maximum Current -90A, a "current beast" in the TO252 package
Technology Trench process, optimizing the balance between conduction and switching performance
Threshold Voltage -2V, medium threshold design, stable switching characteristics
On-Resistance 6.8mΩ (at 10V Drive), 13mΩ (at 4.5V Drive), extremely low loss
Maximum Current -90A, a "current beast" in the TO252 package
Technology Trench process, optimizing the balance between conduction and switching performance
Domain and module applications：
Power Tools/Garden Machinery – Used as the main battery pack switch or motor drive switch, withstands high current surges, low temperature rise, high reliability.
Drone/Robot Power Systems – Utilizes P-channel to simplify drive circuits, while low on-resistance improves battery life.
Automotive Electronics/Vehicle Power Management – Withstands 12V/24V system voltage fluctuations, providing robust on/off control for loads.
Battery Protection Board/Inverter – Quickly disconnects during overcurrent or short circuit, protecting cells and power circuits.
DC-DC Buck Module – Used for synchronous rectification high-side switch, replacing N-channel solutions, eliminating bootstrap circuits for simpler design.
Industrial Control/PLC Output Interface – Drives inductive loads like relays and solenoids, featuring built-in high avalanche ruggedness.
High-Power LED Lighting/Strips – Used as a constant current switch or PWM dimming tube, achieving efficient, flicker-free control. In a nutshell: The TJ80S04M3L is not an ordinary P-channel MOSFET; it is the 'low-voltage switching workhorse' and 'loss terminator' for your high-current P-channel designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
