中文
English
SIHLR110TR-GE3-VB Product details
Back to previous pageProduct introduction：
Imagine this: You are designing a power switching circuit for an industrial control board that needs to withstand a 100V bus voltage while stably outputting a 12A load current. Ordinary MOS transistors either have insufficient voltage tolerance or high conduction loss. VBsemi SIHLR110TR-GE3-VB is designed for this—it integrates 100V withstand voltage, 12A current carrying capacity, and 200mΩ on-resistance into the mature TO252 package, allowing medium-voltage power supply designs to balance reliability and heat dissipation performance.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 100V | 1.5V | 12A | 200(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 100V | 1.5V | 12A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 100V | 1.5V | 12A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N |
Voltage Rating 100V, covering 48V~72V systems and industrial bus applications
Gate Drive Range ±20V, compatible with 5V~12V logic drive
Threshold Voltage 1.5V, can be turned on directly by low-voltage control signals
On-Resistance 200mΩ (at 10V drive), controllable losses, lower temperature rise
Maximum Current 12A, TO252 package offers excellent thermal path, suitable for medium power scenarios
Trench technology, balanced switching characteristics and conduction performance
Gate Drive Range ±20V, compatible with 5V~12V logic drive
Threshold Voltage 1.5V, can be turned on directly by low-voltage control signals
On-Resistance 200mΩ (at 10V drive), controllable losses, lower temperature rise
Maximum Current 12A, TO252 package offers excellent thermal path, suitable for medium power scenarios
Trench technology, balanced switching characteristics and conduction performance
Domain and module applications：
DC-DC Buck Converters – Used as a main switch or synchronous rectifier, providing stable output in 48V input to low voltage scenarios, improving conversion efficiency.
Motor Drive Modules – Used for small brushless DC motors or power tool controllers, withstanding 100V bus voltage and providing 12A phase current drive.
Industrial Sensor Power Supplies – Provides clean power rails for PLCs, instruments, etc., under 24V~72V wide input voltage range.
Battery Chargers / Power Adapters – Handles on/off control in high-side switching circuits, with ample voltage margin to reduce failure risk.
LED Lighting Drives – Used for constant current or constant voltage control, withstanding higher bus voltages for reliable dimming and protection.
Electric Bicycle / Self-balancing Scooter Controllers – Suitable for 48V~72V battery packs, serving as power stage MOSFETs balancing internal resistance and temperature rise.
Network Communication Equipment Power Supplies – Provides stable high-voltage switching capability in base station or router power modules. One-sentence summary: The SIHLR110TR-GE3-VB is not an ordinary MOSFET; it is the "reliable cornerstone" and "efficiency balancer" for your medium-voltage power supply and motor control designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
