Product introduction：
The UPA2708GR-E2-A-VB is a Single N-MOS deeply optimized for low-voltage, high-current power switching scenarios. Trench technology balances ultra-low on-resistance with fast switching characteristics, and the SOP8 package achieves a good balance between thermal dissipation and board area. The combination of 30V withstand voltage, 15A current-carrying capacity, and 5.5mΩ on-resistance makes it a high-performance preferred device for high-density power modules, battery protection, and motor drive applications, especially suitable for systems with strict efficiency and temperature rise requirements.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOP8 |
Single-N |
30V |
|
1.79V |
15A |
|
7(mΩ) |
5.5(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| SOP8 |
Single-N |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| SOP8 |
Single-N |
30V |
|
1.79V |
15A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| SOP8 |
Single-N |
30V |
|
1.79V |
15A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| SOP8 |
Single-N |
|
|
|
|
|
|
|
VDS=30V: Suitable for 5V/12V/24V systems, provides ample voltage margin for spikes, reducing avalanche breakdown risk.
VGS=±20V: Compatible with 1.8V~12V logic levels, can directly connect to MCU/PMIC, eliminating level-shifting circuits.
Vth=1.79V (Typical): Can still enter full conduction region under low-voltage drive, especially suitable for battery voltage decay scenarios.
RDS(on)=5.5mΩ @ VGS=10V; 7mΩ @ VGS=4.5V: Ultra-low on-resistance, significantly reduces full-load temperature rise, can reduce heat sink copper area, improving system efficiency.
ID=15A: Ample continuous current margin, can handle peak demands of most motors and power loads.
Package SOP8: Standard SMD package, better heat dissipation than smaller packages, compatible with mainstream PCB layout, reducing design cost.
Domain and module applications：
DC-DC Converters: Replace Schottky in synchronous rectification; ultra-low on-resistance significantly improves heavy-load efficiency, aiding module miniaturization.
Battery Protection Modules: Fast response ensures microsecond-level shutdown during overcurrent/short circuit; low internal resistance reduces self-heating of the protection board.
Low-Voltage Motor Drives: Low PWM switching losses, smoother motor operation, significantly reduced controller temperature rise.
Portable Device Power Management: Low internal resistance improves boost/buck efficiency, extending battery life; SOP8 package balances heat dissipation and assembly.
Consumer Electronics Control Modules: Logic-level direct drive simplifies peripheral circuitry, suitable for high-volume, low-cost products like smart sockets and USB switches.
LED Lighting Drivers: Low on-state voltage drop reduces constant current source power consumption, supports multi-channel parallel connection, improving overall lamp efficacy.
Automotive Auxiliary Power Supplies: Voltage margin and wide operating temperature range suitable for 12V automotive bus, high reliability. Selection Summary: UPA2708GR-E2-A-VB achieves an excellent balance between on-resistance, current capability, and package size. It is a cost-effective general-purpose choice for 30V low-voltage, high-current switching applications, particularly suitable for power, protection, and drive projects with strict requirements on efficiency and thermal dissipation.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
