中文
English
SL072P06L-TP-VB Product details
Back to previous pageProduct introduction：
SL072P06L-TP-VB is a Single P-MOS deeply optimized for low-voltage power switching scenarios. Trench technology balances low switching loss and high reliability, while the SOT23-3 package achieves a balance between heat dissipation and footprint. The combination of -60V withstand voltage, -5.2A current capability, and 50mΩ on-resistance makes it an ideal cost-reduction upgrade to replace traditional DPAK or SOP-8 package devices, especially suitable for high-density, high-volume applications.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -5.2A | 52(mΩ) | 50(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -5.2A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -5.2A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P |
VDS=-60V: Suitable for 12V/24V/48V systems, provides ample margin for negative voltage spikes, reducing avalanche breakdown risk.
VGS=±20V: Compatible with 1.8V~12V logic levels, can be directly connected to MCU/PMIC, eliminating level-shifting circuits.
Vth=-1.7V (Typical): Can enter the fully enhanced region even with low-voltage drive, especially suitable for battery voltage decay scenarios.
RDS(on)=50mΩ @ VGS=10V: Ultra-low on-resistance, significantly reduces full-load temperature rise, can reduce heat sink copper area.
ID=-5.2A: Ample continuous current margin, can handle peak demands of most portable and automotive auxiliary loads.
Package SOT23-3: Small size, low parasitic parameters, supports high-frequency switching, while saving PCB area and assembly cost.
VGS=±20V: Compatible with 1.8V~12V logic levels, can be directly connected to MCU/PMIC, eliminating level-shifting circuits.
Vth=-1.7V (Typical): Can enter the fully enhanced region even with low-voltage drive, especially suitable for battery voltage decay scenarios.
RDS(on)=50mΩ @ VGS=10V: Ultra-low on-resistance, significantly reduces full-load temperature rise, can reduce heat sink copper area.
ID=-5.2A: Ample continuous current margin, can handle peak demands of most portable and automotive auxiliary loads.
Package SOT23-3: Small size, low parasitic parameters, supports high-frequency switching, while saving PCB area and assembly cost.
Domain and module applications：
Decision Value Analysis
Portable Device Power Management: Low on-resistance improves boost/buck efficiency, extends battery life, small package aids ultra-thin design.
Battery Protection Module: Fast response characteristic ensures microsecond-level shutdown during overcurrent/short circuit, low on-resistance reduces protection board self-heating.
Load Switch and Power Path Management: P-MOS high-side drive simplifies circuit design, suitable for on/off control in battery-powered systems.
Consumer Electronics Control Module: Logic level direct drive simplifies peripherals, suitable for high-volume, low-cost products like smart sockets and USB switches.
LED Lighting Drive: Low on-state voltage drop reduces constant current source power loss, supports multi-channel parallel connection, improving overall luminaire efficiency.
DC-DC Converter: Replaces Schottky diodes in synchronous rectification, can improve heavy-load efficiency by 2~3%, facilitating module miniaturization.
Automotive Auxiliary Power: Voltage tolerance margin and wide operating temperature range (-55~150°C) adapt to 12V/24V automotive buses, high reliability. Selection Summary: The SL072P06L-TP-VB achieves a balance between performance margin, package size, and system cost, making it a cost-effective general-purpose choice for -60V low-voltage switch applications, especially suitable for projects with strict requirements on space and heat dissipation.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
