中文
English
5HP01C-TB-E-VB Product details
Back to previous pageProduct introduction：
5HP01C-TB-E-VB is a Single P-MOS deeply optimized for low-voltage power switching scenarios. Trench technology balances low switching loss and high reliability, while the SOT23-3 package strikes a balance between heat dissipation and footprint. The combination of -60V withstand voltage, -0.5A current capacity, and 3000mΩ on-resistance makes it an ideal choice for high-voltage, low-current control chains, especially suitable for signal switching, level shifting, and high-density, high-volume applications.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -0.5A | 4000(mΩ) | 3000(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -0.5A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | -1.7V | -0.5A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P |
(Key Selection Points)
VDS=-60V: Suitable for 12V/24V/48V systems, providing ample negative voltage spike margin to reduce avalanche breakdown risk.
VGS=±20V: Compatible with 3.3V~12V logic levels, can be directly connected to MCU/PMIC, eliminating level shift circuits.
Vth=-1.7V (typical): Low threshold voltage allows full conduction region entry even at low drive voltages, suitable for battery voltage decay scenarios.
RDS(on)=3000mΩ @ VGS=10V: Typical higher resistance for P-MOS, suitable for low-current signal switching, effectively limiting transient current surges.
ID=-0.5A: Continuous current suitable for low-power branches like load switches, signal switching, and auxiliary power supply.
Package SOT23-3: Small size, low parasitic parameters, supports high-frequency switching, saves PCB area and assembly cost.
VDS=-60V: Suitable for 12V/24V/48V systems, providing ample negative voltage spike margin to reduce avalanche breakdown risk.
VGS=±20V: Compatible with 3.3V~12V logic levels, can be directly connected to MCU/PMIC, eliminating level shift circuits.
Vth=-1.7V (typical): Low threshold voltage allows full conduction region entry even at low drive voltages, suitable for battery voltage decay scenarios.
RDS(on)=3000mΩ @ VGS=10V: Typical higher resistance for P-MOS, suitable for low-current signal switching, effectively limiting transient current surges.
ID=-0.5A: Continuous current suitable for low-power branches like load switches, signal switching, and auxiliary power supply.
Package SOT23-3: Small size, low parasitic parameters, supports high-frequency switching, saves PCB area and assembly cost.
Domain and module applications：
Decision Value Analysis
Load Switch and Power Management: Negative voltage turn-off characteristic suits high-side switch applications, low current loss improves system standby efficiency.
Battery Protection Module: Fast response ensures microsecond-level turn-off during overcurrent/short circuit, small package reduces protection board area.
Low-Voltage Signal Switching: Suitable for analog switches, logic level shifting, etc., high voltage margin enhances system robustness.
Consumer Electronics Control Module: Logic level direct drive simplifies peripherals, suitable for low-cost products like smart home, sensor interfaces.
LED Lighting Driver: Used as auxiliary switch or constant current source bypass, supports multi-channel parallel, improves overall lamp reliability.
DC-DC Converter: Acts as power switch in negative voltage buck or reverse voltage protection circuits, Trench process reduces switching loss.
Automotive Auxiliary Power Supply: Voltage margin and wide operating temperature range (-55~150°C) suit 12V automotive bus, high reliability.Summary: 5HP01C-TB-E-VB balances voltage margin, package size, and system cost, making it a cost-effective general-purpose choice for 60V low-current negative voltage switch applications, especially suitable for projects with strict space and reliability requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
