中文
English
2N7002T,215-VB Product details
Back to previous pageProduct introduction：
2N7002T,215-VB is a small-sized, low-power N-channel MOSFET in SOT23-3 package, with 60V withstand voltage and 0.3A continuous drain current. With Trench process, the typical on-resistance is 2.8Ω (10V drive), suitable for small signal switching and level shifting scenarios. The gate drive is flexible with ±20V wide range, and the threshold voltage is as low as 1.7V, compatible with 3.3V/5V logic control.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 60V | 1.7V | 0.3A | 3100(mΩ) | 2800(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 60V | 1.7V | 0.3A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 60V | 1.7V | 0.3A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N |
Voltage Rating: 60V
Drive Voltage: ±20V
Turn-On Threshold: 1.7V
On-Resistance (4.5V Drive): 3100 mΩ
On-Resistance (10V Drive): 2800 mΩ
Maximum Current: 0.3A
Package: SOT23-3
Technology: Trench
Drive Voltage: ±20V
Turn-On Threshold: 1.7V
On-Resistance (4.5V Drive): 3100 mΩ
On-Resistance (10V Drive): 2800 mΩ
Maximum Current: 0.3A
Package: SOT23-3
Technology: Trench
Domain and module applications：
Portable Device Signal Switching → Level shifting, fast response
MCU I/O Expansion → Small current driving, logic compatible
Battery Protection Circuit → Low leakage, safe and reliable
LED Indicator Light Driving → Micropower control, simple and efficient
Sensor Interface Switching → High impedance isolation, anti-interference
DC-DC Auxiliary Power Supply → Light load switching, lower loss
Communication Module Enable Control → Clean on/off, saving standby power
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
