中文
English
SL100N10L-TP-VB Product details
Back to previous pageProduct introduction：
Imagine this: You are designing an industrial sensor interface board or a battery management module, where the system bus voltage is as high as 72V, yet you need a switch that saves space and can stably carry 4A-level current. Ordinary MOS transistors either lack sufficient voltage tolerance or have too large a package. The VBsemi SL100N10L-TP-VB is designed for this—it packs 100V high withstand voltage, 4.3A current capacity, and an on-resistance as low as 100mΩ into the tiny SOT23-3 body, allowing high-voltage, high-density designs without compromise.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 100V | 1.8V | 4.3A | 141(mΩ) | 100(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 100V | 1.8V | 4.3A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N | 100V | 1.8V | 4.3A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N |
**Product Parameters (Performance Data)**
- Drain-Source Voltage: 100V, easily covers 60V/72V/90V bus systems
- Gate Drive Range: ±20V, compatible with 4.5V~10V logic drive
- Threshold Voltage: 1.8V, reliable turn-on even with low-voltage drive
- On-Resistance: 100mΩ (at 10V drive), lower losses in high-voltage scenarios
- Maximum Current: 4.3A, big energy in a small package
- Drain-Source Voltage: 100V, easily covers 60V/72V/90V bus systems
- Gate Drive Range: ±20V, compatible with 4.5V~10V logic drive
- Threshold Voltage: 1.8V, reliable turn-on even with low-voltage drive
- On-Resistance: 100mΩ (at 10V drive), lower losses in high-voltage scenarios
- Maximum Current: 4.3A, big energy in a small package
Domain and module applications：
- **DC-DC Buck Modules** – As a high-side switching tube, utilizing Trench process for efficient conversion, suitable for 48V to 12V industrial power supplies.
- **Battery Protection Boards** – For 60V~100V lithium battery packs, quickly disconnects the circuit during overvoltage or overcurrent, protecting cell safety.
- **LED Constant Current Drivers** – Utilizing high voltage withstand and stable switching characteristics, suitable for 72V light strips or street lighting systems.
- **Power Tool Control Boards** – Withstands battery pack voltage fluctuations, providing reliable on/off control and current limiting protection.
- **Smart Meters/Circuit Breakers** – Achieves precise switching of high-voltage power rails on narrow PCBs, reducing standby losses.
- **Vehicle Electronics (24V Systems)** – Withstands load dump transient voltages, providing stable power rails for sensors and controllers.
- **Adapters/Chargers** – Used in flyback or PFC auxiliary circuits, improving operational reliability in high-voltage environments.**One-sentence summary: The SL100N10L-TP-VB is not an ordinary MOS tube; it is your "voltage withstand guardian" and "space optimizer" for high-voltage, small-volume power supply designs.**
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
