中文
English
HPD800R900PD-G-VB Product details
Back to previous pageProduct introduction：
VBsemi HPD800R900PD-G-VB is a Single N-channel field-effect transistor using SJ_Multi-EPI (Super Junction Multi-Epitaxial) technology, designed for high-voltage power conversion and industrial-grade power control scenarios. Its TO252 package achieves a good balance between thermal performance and PCB layout convenience, suitable for medium to high power density applications. The device provides stable and reliable switching characteristics within an 800V drain-source voltage range, supports a wide gate drive voltage of ±30V, and features a typical threshold voltage of 3.5V, facilitating drive circuit design and system integration.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 800V | 3.5V | 6A | 850(mΩ) | SJ_Multi-EPI |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 800V | 3.5V | 6A | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 800V | 3.5V | 6A | SJ_Multi-EPI |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N |
- Drain-Source Voltage (VDS): 800V
- Gate-Source Voltage (VGS): ±30V
- Threshold Voltage (Vth): 3.5V (typical)
- On-Resistance (VGS=10V): 850mΩ (typical)
- Maximum Drain Current (ID): 6A
- Package: TO252
- Technology: SJ_Multi-EPI (Super Junction Multi-Epitaxy)
- Gate-Source Voltage (VGS): ±30V
- Threshold Voltage (Vth): 3.5V (typical)
- On-Resistance (VGS=10V): 850mΩ (typical)
- Maximum Drain Current (ID): 6A
- Package: TO252
- Technology: SJ_Multi-EPI (Super Junction Multi-Epitaxy)
Domain and module applications：
1. **Switched-Mode Power Supplies (SMPS)**: Used in high-voltage DC-DC converters, flyback or forward power main switches, leveraging the low-loss characteristics of superjunction technology to improve overall efficiency.
2. **Adapters and Chargers**: Suitable for the high-voltage side power stage of laptop adapters and mobile phone fast chargers, enabling compact design and high reliability.
3. **LED Lighting Drivers**: Used in high-voltage constant current drive circuits, such as industrial lighting, street lights, and outdoor lighting power supplies, providing stable current output and suppressing ripple.
4. **Photovoltaic Inverter Auxiliary Power Supplies**: Serves as an auxiliary switching tube in photovoltaic systems, handling bus high voltage and providing a stable bias power supply.
5. **Industrial Control Power Supplies**: Used for auxiliary power supply and high-voltage isolated power supplies in industrial frequency converters and servo drives, withstanding harsh grid environments.
6. **Electric Vehicle Chargers**: Suitable for the high-voltage primary side of two-wheel/three-wheel electric vehicle chargers, balancing cost and performance.
7. **High-Voltage Relays and Power Switches**: Used as high-voltage load on/off control devices, applied in smart grid terminals, power meters, and industrial controllers.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
