中文
English
ZXMP4A16GTC-VB Product details
Back to previous pageProduct introduction：
1. Product Introduction
ZXMP4A16GTC-VB is a high-efficiency single P-channel power field effect transistor (MOSFET) that uses advanced Trench technology and is packaged in SOT223. This MOSFET is particularly suitable for power management and switch control of low to medium voltage circuits, and can provide efficient current control and power conversion functions for various consumer electronics, industrial control, and automotive electronics. Its excellent electrical performance enables it to perform well in applications with low power consumption and high efficiency requirements, especially in circuits that require high current carrying capacity, low conduction loss, and high stability.
ZXMP4A16GTC-VB is a high-efficiency single P-channel power field effect transistor (MOSFET) that uses advanced Trench technology and is packaged in SOT223. This MOSFET is particularly suitable for power management and switch control of low to medium voltage circuits, and can provide efficient current control and power conversion functions for various consumer electronics, industrial control, and automotive electronics. Its excellent electrical performance enables it to perform well in applications with low power consumption and high efficiency requirements, especially in circuits that require high current carrying capacity, low conduction loss, and high stability.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT223 | Single-P | -40V | -1.7V | -6.2A | 40mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT223 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT223 | Single-P | -40V | -1.7V | -6.2A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT223 | Single-P | -40V | -1.7V | -6.2A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT223 | Single-P |
2. Detailed parameter description
- **Model**: ZXMP4A16GTC-VB
- **Package type**: SOT223
- **Configuration type**: Single-P-Channel
- **Drain-source voltage (VDS)**: -40V
- This parameter indicates that the maximum reverse voltage that the MOSFET can withstand is -40V, which is suitable for voltage control and conversion applications in low-voltage circuits.
- **Gate-source voltage (VGS)**: ±20V
- This parameter limits the voltage range that can be applied between the gate and the source. Exceeding this voltage range may cause device damage, and ensuring accurate control of the gate voltage is the key to system stability.
- **Threshold voltage (Vth)**: -1.7V
- The threshold voltage is the critical gate voltage for the P-channel MOSFET to turn on. When VGS is less than -1.7V, the device starts to turn on. This parameter helps designers precisely control the switching action of the MOSFET.
- **On-resistance (RDS(ON))**:
- 48mΩ (at VGS = 4.5V)
- 40mΩ (at VGS = 10V)
- Low on-resistance means that the device has less power loss during operation, thereby reducing heat generation and improving the overall efficiency of the system, especially for applications that require low power loss.
- **Maximum drain current (ID)**: -6.2A
- This parameter indicates the maximum current load that the MOSFET can withstand during normal operation. The maximum current of -6.2A enables it to handle high power loads while maintaining stable operating conditions.
- **Technology**: Trench technology
- MOSFETs using Trench technology have higher conduction efficiency and reduce on-resistance, thereby achieving low power consumption and high-efficiency power control.
- **Model**: ZXMP4A16GTC-VB
- **Package type**: SOT223
- **Configuration type**: Single-P-Channel
- **Drain-source voltage (VDS)**: -40V
- This parameter indicates that the maximum reverse voltage that the MOSFET can withstand is -40V, which is suitable for voltage control and conversion applications in low-voltage circuits.
- **Gate-source voltage (VGS)**: ±20V
- This parameter limits the voltage range that can be applied between the gate and the source. Exceeding this voltage range may cause device damage, and ensuring accurate control of the gate voltage is the key to system stability.
- **Threshold voltage (Vth)**: -1.7V
- The threshold voltage is the critical gate voltage for the P-channel MOSFET to turn on. When VGS is less than -1.7V, the device starts to turn on. This parameter helps designers precisely control the switching action of the MOSFET.
- **On-resistance (RDS(ON))**:
- 48mΩ (at VGS = 4.5V)
- 40mΩ (at VGS = 10V)
- Low on-resistance means that the device has less power loss during operation, thereby reducing heat generation and improving the overall efficiency of the system, especially for applications that require low power loss.
- **Maximum drain current (ID)**: -6.2A
- This parameter indicates the maximum current load that the MOSFET can withstand during normal operation. The maximum current of -6.2A enables it to handle high power loads while maintaining stable operating conditions.
- **Technology**: Trench technology
- MOSFETs using Trench technology have higher conduction efficiency and reduce on-resistance, thereby achieving low power consumption and high-efficiency power control.
Domain and module applications：
3. Product application fields and module examples
ZXMP4A16GTC-VB is suitable for multiple fields and modules due to its low on-resistance, stable current carrying capacity and efficient performance. Here are some typical applications:
1. **Consumer electronics (such as smart speakers, battery-powered devices)**
In consumer electronic devices such as smart speakers, power tools and portable devices, ZXMP4A16GTC-VB can be used for battery management and power control. Its low on-resistance helps reduce energy loss during battery discharge and extend battery life while maintaining low power loss during battery voltage conversion. The SOT223 package enables it to adapt to compact circuit design, especially suitable for space-limited applications such as smart speakers, battery-powered devices, etc.
2. **Industrial automation (such as relay drive, motor control)**
In industrial automation equipment, ZXMP4A16GTC-VB can be used for relay drive and motor control modules. This MOSFET can effectively control the switching action of the relay, provide sufficient current to drive the relay coil, and ensure that the electrical signals in industrial equipment can be switched reliably. In addition, the MOSFET's -40V drain-source voltage and maximum drain current of up to -6.2A enable it to adapt to various industrial voltage fluctuations and ensure the stability of the equipment in harsh environments.
3. **Automotive electronics (such as power management, dashboard display)**
In automotive electronic systems, ZXMP4A16GTC-VB can be used for power management and voltage regulation modules. It is especially suitable for voltage regulation in automotive dashboard display systems. This MOSFET can convert the car battery voltage into a stable operating voltage, ensuring that the dashboard display system can still operate stably under different loads. At the same time, the low on-resistance can significantly reduce power loss and improve the efficiency and stability of the automotive power system.
4. **LED drive and low-power power supply applications**
ZXMP4A16GTC-VB is also suitable for LED drive circuits and other low-power power supply designs. Its low on-resistance makes it generate very little heat when controlling current, which is suitable for LED drive systems that require precise current control and high efficiency. In these applications, ZXMP4A16GTC-VB can provide stable power supply and optimize the overall efficiency of the system.
5. **Communication and data processing equipment (such as signal switching and power conversion)**
In communication equipment and data processing systems, ZXMP4A16GTC-VB can be used for power conversion and signal switch control. It can work stably in high-speed circuits, provide efficient power management, reduce signal loss, and improve the overall performance of the system. It is particularly suitable for high-frequency signal transmission and power conversion applications.
Summary
ZXMP4A16GTC-VB is an excellent P-channel MOSFET suitable for a variety of electronic applications requiring high efficiency and low power consumption. With its low on-resistance and high current carrying capacity, it is widely used in consumer electronics, industrial automation, automotive electronics, LED drivers and communication equipment and other fields. Its stable electrical performance and high efficiency make it an ideal choice for a variety of power management and signal control modules.
ZXMP4A16GTC-VB is suitable for multiple fields and modules due to its low on-resistance, stable current carrying capacity and efficient performance. Here are some typical applications:
1. **Consumer electronics (such as smart speakers, battery-powered devices)**
In consumer electronic devices such as smart speakers, power tools and portable devices, ZXMP4A16GTC-VB can be used for battery management and power control. Its low on-resistance helps reduce energy loss during battery discharge and extend battery life while maintaining low power loss during battery voltage conversion. The SOT223 package enables it to adapt to compact circuit design, especially suitable for space-limited applications such as smart speakers, battery-powered devices, etc.
2. **Industrial automation (such as relay drive, motor control)**
In industrial automation equipment, ZXMP4A16GTC-VB can be used for relay drive and motor control modules. This MOSFET can effectively control the switching action of the relay, provide sufficient current to drive the relay coil, and ensure that the electrical signals in industrial equipment can be switched reliably. In addition, the MOSFET's -40V drain-source voltage and maximum drain current of up to -6.2A enable it to adapt to various industrial voltage fluctuations and ensure the stability of the equipment in harsh environments.
3. **Automotive electronics (such as power management, dashboard display)**
In automotive electronic systems, ZXMP4A16GTC-VB can be used for power management and voltage regulation modules. It is especially suitable for voltage regulation in automotive dashboard display systems. This MOSFET can convert the car battery voltage into a stable operating voltage, ensuring that the dashboard display system can still operate stably under different loads. At the same time, the low on-resistance can significantly reduce power loss and improve the efficiency and stability of the automotive power system.
4. **LED drive and low-power power supply applications**
ZXMP4A16GTC-VB is also suitable for LED drive circuits and other low-power power supply designs. Its low on-resistance makes it generate very little heat when controlling current, which is suitable for LED drive systems that require precise current control and high efficiency. In these applications, ZXMP4A16GTC-VB can provide stable power supply and optimize the overall efficiency of the system.
5. **Communication and data processing equipment (such as signal switching and power conversion)**
In communication equipment and data processing systems, ZXMP4A16GTC-VB can be used for power conversion and signal switch control. It can work stably in high-speed circuits, provide efficient power management, reduce signal loss, and improve the overall performance of the system. It is particularly suitable for high-frequency signal transmission and power conversion applications.
Summary
ZXMP4A16GTC-VB is an excellent P-channel MOSFET suitable for a variety of electronic applications requiring high efficiency and low power consumption. With its low on-resistance and high current carrying capacity, it is widely used in consumer electronics, industrial automation, automotive electronics, LED drivers and communication equipment and other fields. Its stable electrical performance and high efficiency make it an ideal choice for a variety of power management and signal control modules.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
