中文
English
VSD040P10MS-VB Product details
Back to previous pageProduct introduction：
Product Introduction (VSD040P10MS-VB)
The **VSD040P10MS-VB** is a **single P-channel MOSFET** in a **TO252** package, designed for medium-high voltage and high current applications. Its maximum drain-source voltage (VDS) is **-100V**, suitable for negative power supply applications, load switching and power regulation systems. The threshold voltage (Vth) of this MOSFET is **-2V**, which has the ability to work reliably at lower gate-source voltages. Using **Trench technology**, its **RDS(ON)** is **37mΩ** at **VGS = 4.5V**, and is reduced to **33mΩ** at **VGS = 10V**, which can effectively reduce conduction losses and improve system efficiency.
Its **maximum current carrying capacity is **-40A**, making it suitable for applications with high current and high power loads. The VSD040P10MS-VB is a highly efficient power management switch device, ideal for use in electronic systems that require efficient current control and low power loss.
The **VSD040P10MS-VB** is a **single P-channel MOSFET** in a **TO252** package, designed for medium-high voltage and high current applications. Its maximum drain-source voltage (VDS) is **-100V**, suitable for negative power supply applications, load switching and power regulation systems. The threshold voltage (Vth) of this MOSFET is **-2V**, which has the ability to work reliably at lower gate-source voltages. Using **Trench technology**, its **RDS(ON)** is **37mΩ** at **VGS = 4.5V**, and is reduced to **33mΩ** at **VGS = 10V**, which can effectively reduce conduction losses and improve system efficiency.
Its **maximum current carrying capacity is **-40A**, making it suitable for applications with high current and high power loads. The VSD040P10MS-VB is a highly efficient power management switch device, ideal for use in electronic systems that require efficient current control and low power loss.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -100V | -2V | -40A | 33mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -100V | -2V | -40A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-P | -100V | -2V | -40A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-P |
Detailed parameter description
- **Model**: VSD040P10MS-VB
- **Package type**: TO252
- **Configuration**: Single P channel
- **Drain-source voltage (VDS)**: -100V
- **Gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: -2V
- **On-resistance (RDS(ON))**:
- 37mΩ @ VGS = 4.5V
- 33mΩ @ VGS = 10V
- **Maximum current (ID)**: -40A
- **Technology type**: Trench technology
- **Switching speed**: High-speed switch, suitable for high-frequency applications
- **Operating temperature range**: -55°C to +150°C (typical)
- **Thermal resistance**: Optimized thermal resistance design to improve heat dissipation efficiency
- **Maximum power consumption**: Based on the current and on-resistance design, power loss needs to be considered.
- **Model**: VSD040P10MS-VB
- **Package type**: TO252
- **Configuration**: Single P channel
- **Drain-source voltage (VDS)**: -100V
- **Gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: -2V
- **On-resistance (RDS(ON))**:
- 37mΩ @ VGS = 4.5V
- 33mΩ @ VGS = 10V
- **Maximum current (ID)**: -40A
- **Technology type**: Trench technology
- **Switching speed**: High-speed switch, suitable for high-frequency applications
- **Operating temperature range**: -55°C to +150°C (typical)
- **Thermal resistance**: Optimized thermal resistance design to improve heat dissipation efficiency
- **Maximum power consumption**: Based on the current and on-resistance design, power loss needs to be considered.
Domain and module applications：
Applications and module examples
1. **DC-DC Converter (Buck Converter)**:
- **VSD040P10MS-VB** plays an important role as a **P-channel MOSFET** in **DC-DC converters** (especially buck converters). It plays an important control role in load switching and can save energy in high-efficiency power conversion. Its low on-resistance can minimize energy loss during the conversion process and provide high-efficiency power management, which is particularly suitable for battery-powered devices and portable power systems.
2. **Battery Management System (BMS)**:
- In **Battery Management System (BMS)**, **VSD040P10MS-VB** is suitable for **battery charging and discharging control**. As an efficient switching element, it can accurately control the current flow, prevent overcurrent, and ensure that the battery operates within a safe voltage and current range. In addition, its high current carrying capacity (maximum 40A) makes it suitable for applications that require high current and fast switching, such as electric vehicles, solar panel energy storage systems, etc.
3. **Load Switching and Power Regulation**:
- The low RDS(ON) and high current carrying capacity of the **VSD040P10MS-VB** make it an ideal choice for **load switching and power regulation applications**. It can efficiently switch power and provide a stable current to the load. This MOSFET is particularly important in negative power supply control and reverse current protection, and is widely used in industrial equipment, communication systems, portable electronic devices and other fields.
4. **Electric Drive System and Motor Control**:
- The **VSD040P10MS-VB** plays an important role in **electric drive system** and **motor control**, especially in **inverter** and **electric motor drive** systems. As an efficient switching element, it can quickly respond to current changes, ensure that the electric motor can run smoothly, and reduce power losses during current switching. Suitable for applications such as power tools and electric vehicles.
5. **Power Amplifier and Audio Amplifier**:
- **VSD040P10MS-VB** can also be used in **power amplifier** and **audio amplifier** modules as a switching element to adjust the signal amplification process. In situations where high current, low power consumption and high efficiency are required, this MOSFET can provide stable power output and is widely used in high-efficiency sound systems and high-fidelity audio equipment.
6. **Overcurrent Protection and Power Switch**:
- Due to its high current carrying capacity, **VSD040P10MS-VB** is also suitable for **overcurrent protection** and **power switch** control. In high-power applications, it can effectively control the current flow, prevent current overload, and ensure the stable operation of the system and equipment. This feature makes it important in the protection system of power supply systems, UPS power supplies, transformers and other equipment.
1. **DC-DC Converter (Buck Converter)**:
- **VSD040P10MS-VB** plays an important role as a **P-channel MOSFET** in **DC-DC converters** (especially buck converters). It plays an important control role in load switching and can save energy in high-efficiency power conversion. Its low on-resistance can minimize energy loss during the conversion process and provide high-efficiency power management, which is particularly suitable for battery-powered devices and portable power systems.
2. **Battery Management System (BMS)**:
- In **Battery Management System (BMS)**, **VSD040P10MS-VB** is suitable for **battery charging and discharging control**. As an efficient switching element, it can accurately control the current flow, prevent overcurrent, and ensure that the battery operates within a safe voltage and current range. In addition, its high current carrying capacity (maximum 40A) makes it suitable for applications that require high current and fast switching, such as electric vehicles, solar panel energy storage systems, etc.
3. **Load Switching and Power Regulation**:
- The low RDS(ON) and high current carrying capacity of the **VSD040P10MS-VB** make it an ideal choice for **load switching and power regulation applications**. It can efficiently switch power and provide a stable current to the load. This MOSFET is particularly important in negative power supply control and reverse current protection, and is widely used in industrial equipment, communication systems, portable electronic devices and other fields.
4. **Electric Drive System and Motor Control**:
- The **VSD040P10MS-VB** plays an important role in **electric drive system** and **motor control**, especially in **inverter** and **electric motor drive** systems. As an efficient switching element, it can quickly respond to current changes, ensure that the electric motor can run smoothly, and reduce power losses during current switching. Suitable for applications such as power tools and electric vehicles.
5. **Power Amplifier and Audio Amplifier**:
- **VSD040P10MS-VB** can also be used in **power amplifier** and **audio amplifier** modules as a switching element to adjust the signal amplification process. In situations where high current, low power consumption and high efficiency are required, this MOSFET can provide stable power output and is widely used in high-efficiency sound systems and high-fidelity audio equipment.
6. **Overcurrent Protection and Power Switch**:
- Due to its high current carrying capacity, **VSD040P10MS-VB** is also suitable for **overcurrent protection** and **power switch** control. In high-power applications, it can effectively control the current flow, prevent current overload, and ensure the stable operation of the system and equipment. This feature makes it important in the protection system of power supply systems, UPS power supplies, transformers and other equipment.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
