中文
English
STD10NF06LT4-VB Product details
Back to previous pageProduct introduction：
Product Introduction
**STD10NF06LT4-VB** is a high-efficiency single-channel N-type MOSFET in **TO252** package with low on-resistance and high reliability. The device supports a maximum drain-source voltage (VDS) of **60V** and a gate-source voltage (VGS) of **±20V**. Through optimized trench technology, this MOSFET provides lower on-resistance and higher current capability to meet the needs of a variety of power conversion and drive applications.
**STD10NF06LT4-VB** is a high-efficiency single-channel N-type MOSFET in **TO252** package with low on-resistance and high reliability. The device supports a maximum drain-source voltage (VDS) of **60V** and a gate-source voltage (VGS) of **±20V**. Through optimized trench technology, this MOSFET provides lower on-resistance and higher current capability to meet the needs of a variety of power conversion and drive applications.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | 73mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 18A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N |
Detailed parameter description
| **Parameter** | **Description** |
|---------------------|------------------------------|
| **Package** | TO252 |
| **Configuration** | Single channel N-type|
| **Drain-source voltage (VDS)** | 60V |
| **Gate-source voltage (VGS)** | ±20V |
| **Threshold voltage (Vth)** | 1.7V |
| **On-resistance (RDS(ON))** | 85mΩ (VGS=4.5V); 73mΩ (VGS=10V) |
| **Maximum drain current (ID)** | 18A |
| **Technology type** | Trench |
| **Application characteristics** | High efficiency, low power consumption, suitable for switching and power management applications|
| **Parameter** | **Description** |
|---------------------|------------------------------|
| **Package** | TO252 |
| **Configuration** | Single channel N-type|
| **Drain-source voltage (VDS)** | 60V |
| **Gate-source voltage (VGS)** | ±20V |
| **Threshold voltage (Vth)** | 1.7V |
| **On-resistance (RDS(ON))** | 85mΩ (VGS=4.5V); 73mΩ (VGS=10V) |
| **Maximum drain current (ID)** | 18A |
| **Technology type** | Trench |
| **Application characteristics** | High efficiency, low power consumption, suitable for switching and power management applications|
Domain and module applications：
Applicable fields and modules
**STD10NF06LT4-VB**'s wide applicability enables it to meet the needs of various electronic systems. The following are its typical application scenarios:
1. **Automotive electronics**
- **Motor drive**: Such as window lifters, seat adjusters and wiper drive circuits, taking advantage of its high current carrying capacity and low conduction loss characteristics.
- **Automotive DC-DC converter**: Used for efficient voltage conversion to extend vehicle battery life.
2. **Consumer electronics**
- **Power management module (PMU)**: Suitable for power switches and power management circuits for devices such as laptops and TVs.
- **Adapters and chargers**: Improve charging efficiency and reduce heat loss.
3. **Industrial control**
- **Load switch**: Suitable for motor drive and load switching modules in industrial automation.
- **Power converter**: High-efficiency DC-DC or DC-AC power conversion circuits.
4. **Photovoltaic and Energy Storage**
- **Photovoltaic inverter**: As a DC voltage conversion or switching element, it improves the efficiency of photovoltaic power generation systems.
- **Energy storage system**: Acts as a key switching element in battery management and energy flow control.
With these features, **STD10NF06LT4-VB** can be widely used in high-efficiency and high-reliability power electronic modules, helping designers achieve better system performance and energy consumption optimization.
**STD10NF06LT4-VB**'s wide applicability enables it to meet the needs of various electronic systems. The following are its typical application scenarios:
1. **Automotive electronics**
- **Motor drive**: Such as window lifters, seat adjusters and wiper drive circuits, taking advantage of its high current carrying capacity and low conduction loss characteristics.
- **Automotive DC-DC converter**: Used for efficient voltage conversion to extend vehicle battery life.
2. **Consumer electronics**
- **Power management module (PMU)**: Suitable for power switches and power management circuits for devices such as laptops and TVs.
- **Adapters and chargers**: Improve charging efficiency and reduce heat loss.
3. **Industrial control**
- **Load switch**: Suitable for motor drive and load switching modules in industrial automation.
- **Power converter**: High-efficiency DC-DC or DC-AC power conversion circuits.
4. **Photovoltaic and Energy Storage**
- **Photovoltaic inverter**: As a DC voltage conversion or switching element, it improves the efficiency of photovoltaic power generation systems.
- **Energy storage system**: Acts as a key switching element in battery management and energy flow control.
With these features, **STD10NF06LT4-VB** can be widely used in high-efficiency and high-reliability power electronic modules, helping designers achieve better system performance and energy consumption optimization.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
