中文
English
STD1030PL-VB Product details
Back to previous pageProduct introduction：
1. Product Introduction
**STD1030PL-VB** is a high-performance single P-channel power MOSFET in TO251 package, designed for high-efficiency switching applications. The main features of this device include low on-resistance, low gate drive voltage requirement, and excellent current handling capability. These features make it very suitable for systems that require compactness, low loss and high reliability.
---
**STD1030PL-VB** is a high-performance single P-channel power MOSFET in TO251 package, designed for high-efficiency switching applications. The main features of this device include low on-resistance, low gate drive voltage requirement, and excellent current handling capability. These features make it very suitable for systems that require compactness, low loss and high reliability.
---
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO251 | Single-P | -30V | -1.7V | -20A | 56mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-P | -30V | -1.7V | -20A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-P | -30V | -1.7V | -20A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO251 | Single-P |
2. Detailed parameter description
The following are the key parameters of **STD1030PL-VB**:
| **Parameter** | **Value** | **Description** |
|--------------------|----------------------------------|---------------------------------------------|
| **Package type** | TO251 | Enhanced power density and heat dissipation performance through miniaturization design. |
| **Configuration** | Single P-channel | Provides reverse current protection, suitable for applications such as load switches. |
| **Drain-source voltage (VDS)** | -30V | Maximum allowable drain-source voltage, suitable for low-voltage circuit design. |
| **Gate voltage (VGS)** | ±20V | Gate voltage range to ensure control safety and flexibility. |
| **Throughput (Vth)** | -1.7V | Ensures that the device works at a lower drive voltage. |
| **On-resistance (RDS(ON))** | 72mΩ @ VGS=4.5V
56mΩ @ VGS=10V | Low on-resistance reduces power consumption and improves system efficiency. |
| **Drain current (ID)** | -20A | Supports larger current loads and meets high power requirements. |
| **Technology** | Trench | Trench process significantly improves conductivity and current handling capabilities. |
---
The following are the key parameters of **STD1030PL-VB**:
| **Parameter** | **Value** | **Description** |
|--------------------|----------------------------------|---------------------------------------------|
| **Package type** | TO251 | Enhanced power density and heat dissipation performance through miniaturization design. |
| **Configuration** | Single P-channel | Provides reverse current protection, suitable for applications such as load switches. |
| **Drain-source voltage (VDS)** | -30V | Maximum allowable drain-source voltage, suitable for low-voltage circuit design. |
| **Gate voltage (VGS)** | ±20V | Gate voltage range to ensure control safety and flexibility. |
| **Throughput (Vth)** | -1.7V | Ensures that the device works at a lower drive voltage. |
| **On-resistance (RDS(ON))** | 72mΩ @ VGS=4.5V
56mΩ @ VGS=10V | Low on-resistance reduces power consumption and improves system efficiency. |
| **Drain current (ID)** | -20A | Supports larger current loads and meets high power requirements. |
| **Technology** | Trench | Trench process significantly improves conductivity and current handling capabilities. |
---
Domain and module applications：
III. Application fields and module examples
**STD1030PL-VB** has a wide range of applications in many fields. Some typical usage scenarios are listed below:
1. **Consumer electronics**
- **Module**: Battery protection circuit, DC-DC converter
- The low on-resistance and high current capability of this device are very suitable for battery management modules (such as mobile devices, laptops), providing efficient power switching and protection functions.
2. **Automotive electronics**
- **Module**: Electronic control unit (ECU), load switch
- Its low voltage characteristics and high reliability enable it to meet the reverse current protection requirements in automotive load control modules, improve system efficiency and reduce heat.
3. **Industrial control**
- **Module**: Motor drive, relay replacement circuit
- In industrial environments, this device can be used for motor start control, or replace traditional relays to achieve faster and more reliable switch control.
4. **Photovoltaic inverter and energy storage system**
- **Module**: DC side switch, energy management unit
- In energy systems, its withstand voltage characteristics and low power consumption are very suitable for switch applications, ensuring the maximum efficiency of photovoltaic and energy storage systems.
This wide applicability makes **STD1030PL-VB** the best choice for high-efficiency power switch design, suitable for various scenarios that need to optimize energy consumption and reliability.
**STD1030PL-VB** has a wide range of applications in many fields. Some typical usage scenarios are listed below:
1. **Consumer electronics**
- **Module**: Battery protection circuit, DC-DC converter
- The low on-resistance and high current capability of this device are very suitable for battery management modules (such as mobile devices, laptops), providing efficient power switching and protection functions.
2. **Automotive electronics**
- **Module**: Electronic control unit (ECU), load switch
- Its low voltage characteristics and high reliability enable it to meet the reverse current protection requirements in automotive load control modules, improve system efficiency and reduce heat.
3. **Industrial control**
- **Module**: Motor drive, relay replacement circuit
- In industrial environments, this device can be used for motor start control, or replace traditional relays to achieve faster and more reliable switch control.
4. **Photovoltaic inverter and energy storage system**
- **Module**: DC side switch, energy management unit
- In energy systems, its withstand voltage characteristics and low power consumption are very suitable for switch applications, ensuring the maximum efficiency of photovoltaic and energy storage systems.
This wide applicability makes **STD1030PL-VB** the best choice for high-efficiency power switch design, suitable for various scenarios that need to optimize energy consumption and reliability.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
