中文
English
SPP6506S26RGB-VB Product details
Back to previous pageProduct introduction：
SPP6506S26RGB-VB MOSFET Product Introduction
The SPP6506S26RGB-VB is a high-efficiency bipolar P+N channel MOSFET in a SOT23-6 package. This MOSFET is equipped with two P-type and N-type channels for applications that require precise switching control of current. It has a maximum drain-source voltage (VDS) of -20V, a gate-source voltage (VGS) of ±12V, and a threshold voltage (Vth) of -0.6V, making it suitable for low-voltage, high-efficiency switching applications.
The on-resistance (RDS(ON)) of the SPP6506S26RGB-VB is 75mΩ at VGS = 4.5V and 100mΩ at VGS = 2.5V, with low conduction losses. Its maximum drain current (ID) is -4A, which can handle current requirements within a certain range and is suitable for use in battery-powered low-power systems. It is widely used in switching circuits, power regulation and signal conditioning of electronic devices. Based on Trench technology, SPP6506S26RGB-VB provides high performance and stability.
The SPP6506S26RGB-VB is a high-efficiency bipolar P+N channel MOSFET in a SOT23-6 package. This MOSFET is equipped with two P-type and N-type channels for applications that require precise switching control of current. It has a maximum drain-source voltage (VDS) of -20V, a gate-source voltage (VGS) of ±12V, and a threshold voltage (Vth) of -0.6V, making it suitable for low-voltage, high-efficiency switching applications.
The on-resistance (RDS(ON)) of the SPP6506S26RGB-VB is 75mΩ at VGS = 4.5V and 100mΩ at VGS = 2.5V, with low conduction losses. Its maximum drain current (ID) is -4A, which can handle current requirements within a certain range and is suitable for use in battery-powered low-power systems. It is widely used in switching circuits, power regulation and signal conditioning of electronic devices. Based on Trench technology, SPP6506S26RGB-VB provides high performance and stability.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | 100mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P |
SPP6506S26RGB-VB MOSFET Detailed Parameter Description
| **Parameter** | **Description** |
|----------------------|------------------------------------|
| **Package** | SOT23-6 |
| **Configuration** | Dual P+N Channel MOSFET |
| **Drain-Source Voltage (VDS)** | -20V |
| **Gate-Source Voltage (VGS)** | ±12V |
| **Threshold Voltage (Vth)** | -0.6V |
| **On-Resistance (RDS(ON))** | 100mΩ (VGS = 2.5V) / 75mΩ (VGS = 4.5V) |
| **Maximum Drain Current (ID)** | -4A |
| **Technology** | Trench Technology|
| **Parameter** | **Description** |
|----------------------|------------------------------------|
| **Package** | SOT23-6 |
| **Configuration** | Dual P+N Channel MOSFET |
| **Drain-Source Voltage (VDS)** | -20V |
| **Gate-Source Voltage (VGS)** | ±12V |
| **Threshold Voltage (Vth)** | -0.6V |
| **On-Resistance (RDS(ON))** | 100mΩ (VGS = 2.5V) / 75mΩ (VGS = 4.5V) |
| **Maximum Drain Current (ID)** | -4A |
| **Technology** | Trench Technology|
Domain and module applications：
Application fields and modules of SPP6506S26RGB-VB MOSFET
1. **Low Power Switching Circuits**
Due to its low on-resistance and small drain-source voltage, SPP6506S26RGB-VB is very suitable for use in low power switching circuits. In these applications, MOSFET acts as a load switch or current control element, which can ensure efficient power management and low power consumption. For example, in portable devices such as smartphones, tablets and wearable devices, it can help extend battery life and reduce the frequency of battery charging.
2. **Battery Protection and Battery Management Systems**
The characteristics of this MOSFET make it very suitable for use in battery protection and management systems. Especially when used for battery charge and discharge control, SPP6506S26RGB-VB can provide accurate current switching operation to prevent overcharging or over-discharging of the battery. For example, in applications such as power tools, electric toys, and electric bicycles, the SPP6506S26RGB-VB ensures stable battery operation and prevents battery damage.
3. **Electric Drive Systems**
This MOSFET is particularly well-suited for electric drive systems. In these systems, the SPP6506S26RGB-VB is a switching element that efficiently controls the power supply to the motor and is suitable for small and medium-power motor drives. For example, in motor control systems in power tools, drones, and electric vehicles, the MOSFET is responsible for switching current to ensure efficient operation of the motor.
4. **Power Regulation and Voltage Stabilization**
The SPP6506S26RGB-VB is also suitable for power regulation and voltage stabilization circuits. Due to its low on-resistance and high current carrying capacity, it can be used as an efficient switching element in DC-DC converters, linear regulators, and power distribution modules. For example, in a high-performance power management unit (PMU), the SPP6506S26RGB-VB can effectively regulate voltage to ensure stable system operation and avoid circuit failures caused by unstable voltage.
5. **Load Switching and Signal Conditioning**
The SPP6506S26RGB-VB is suitable for signal conditioning and load switching applications, especially in situations where low voltage and high-efficiency switching are required. For example, in sensor signal conditioning circuits, data acquisition systems, or wireless transmission modules, the SPP6506S26RGB-VB can be used to control the switching state of the signal path or load to ensure signal transmission stability and minimize circuit power consumption.
6. **Consumer Electronics**
In various consumer electronic products, such as TVs, audio equipment, game consoles, etc., the SPP6506S26RGB-VB can optimize power switching performance as a load switch or power management device. Especially in consumer electronic devices with low power consumption requirements, MOSFET can effectively reduce energy loss and improve battery life, bringing users longer usage time.
1. **Low Power Switching Circuits**
Due to its low on-resistance and small drain-source voltage, SPP6506S26RGB-VB is very suitable for use in low power switching circuits. In these applications, MOSFET acts as a load switch or current control element, which can ensure efficient power management and low power consumption. For example, in portable devices such as smartphones, tablets and wearable devices, it can help extend battery life and reduce the frequency of battery charging.
2. **Battery Protection and Battery Management Systems**
The characteristics of this MOSFET make it very suitable for use in battery protection and management systems. Especially when used for battery charge and discharge control, SPP6506S26RGB-VB can provide accurate current switching operation to prevent overcharging or over-discharging of the battery. For example, in applications such as power tools, electric toys, and electric bicycles, the SPP6506S26RGB-VB ensures stable battery operation and prevents battery damage.
3. **Electric Drive Systems**
This MOSFET is particularly well-suited for electric drive systems. In these systems, the SPP6506S26RGB-VB is a switching element that efficiently controls the power supply to the motor and is suitable for small and medium-power motor drives. For example, in motor control systems in power tools, drones, and electric vehicles, the MOSFET is responsible for switching current to ensure efficient operation of the motor.
4. **Power Regulation and Voltage Stabilization**
The SPP6506S26RGB-VB is also suitable for power regulation and voltage stabilization circuits. Due to its low on-resistance and high current carrying capacity, it can be used as an efficient switching element in DC-DC converters, linear regulators, and power distribution modules. For example, in a high-performance power management unit (PMU), the SPP6506S26RGB-VB can effectively regulate voltage to ensure stable system operation and avoid circuit failures caused by unstable voltage.
5. **Load Switching and Signal Conditioning**
The SPP6506S26RGB-VB is suitable for signal conditioning and load switching applications, especially in situations where low voltage and high-efficiency switching are required. For example, in sensor signal conditioning circuits, data acquisition systems, or wireless transmission modules, the SPP6506S26RGB-VB can be used to control the switching state of the signal path or load to ensure signal transmission stability and minimize circuit power consumption.
6. **Consumer Electronics**
In various consumer electronic products, such as TVs, audio equipment, game consoles, etc., the SPP6506S26RGB-VB can optimize power switching performance as a load switch or power management device. Especially in consumer electronic devices with low power consumption requirements, MOSFET can effectively reduce energy loss and improve battery life, bringing users longer usage time.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
