Product parameter:
VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp(V) |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
SOT23-3 |
Single-N |
60V |
20(±V) |
1.7V |
0.3A |
|
|
2800mΩ |
|
2. Detailed parameter description
- **Model**: SPN7002LS23RGB-VB
- **Package type**: SOT23-3
- **Configuration**: Single-N-Channel
- **Maximum drain-source voltage (VDS)**: 60V
- **Maximum gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 1.7V
- **On-resistance (RDS(ON))**:
- 3100mΩ @ VGS=4.5V
- 2800mΩ @ VGS=10V
- **Maximum drain current (ID)**: 0.3A
- **Technology**: Trench technology
- **Application areas**: low-power power management, signal switching, load drive, electronic switching circuits, etc.
Domain and module applications:
3. Application Examples
1. **Low-power power management**
SPN7002LS23RGB-VB is suitable for low-power power management systems, especially in devices that require low-current switching and small packages. For example, in portable electronic devices such as small sensors, handheld devices, and wearable devices, this MOSFET can be used as a switching element to efficiently manage power, ensure low-energy operation, and optimize battery life.
2. **Signal switching and control**
Due to the low Vth (1.7V) of this MOSFET, it is very suitable for use as a low-voltage signal switching element. For example, in signal selection and switching circuits, SPN7002LS23RGB-VB can efficiently switch signal paths, provide fast response and low power loss, and is widely needed in applications such as consumer electronics, wireless communication equipment, and sensor networks.
3. **Load driving circuit**
In some low-current load driving circuits, such as driving small relays, LEDs or other loads, SPN7002LS23RGB-VB also performs well. It is suitable for application scenarios requiring low on-resistance and lower load current (such as less than 0.3A), and can provide stable and reliable switching operation. This MOSFET is widely used in electric toys, small robots, smart lighting systems, etc.
4. **Electronic switching circuit**
In electronic switching applications, SPN7002LS23RGB-VB can be used as a switching element to efficiently control the flow of current. For example, in switching power supplies and battery management systems, this MOSFET can provide fast switching response and reduce energy loss, which helps to improve the overall performance and efficiency of the circuit.
5. **Automotive electronic system**
This MOSFET is suitable for low-power switching applications in automotive electronic systems, such as low-power signal switches and protection circuits for automobiles. In various electronic control units (ECUs) of electric vehicles or smart cars, SPN7002LS23RGB-VB can provide stable switch control and efficient power management.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support:
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours