中文
English
SM6A23NSUB-VB Product details
Back to previous pageProduct introduction：
SM6A23NSUB-VB Product Introduction
**SM6A23NSUB-VB** is a single N-channel **MOSFET** in **TO251** package. It has a **650V** high drain-source voltage (VDS), suitable for power control and switching applications that require higher voltage tolerance. The maximum gate-source voltage of the device is **±30V**, and the threshold voltage (Vth) is **3.5V**, ensuring that it can achieve switching operation under appropriate gate drive voltage. With **950mΩ** on-resistance (RDS(ON) @VGS=10V), although its switching efficiency is slightly lower than that of MOSFETs with lower on-resistance, it can still provide sufficient performance for general power switching applications. Its maximum drain current is **5A**, which makes it perform well in the medium power range.
Using **SJ_Multi-EPI** technology, this MOSFET provides superior electrical performance, can effectively control switching losses and heat generation, and is suitable for multiple high-voltage applications. Its high withstand voltage characteristics make it widely used in high-power systems such as **industrial power supplies**, **power tools**, **battery management** and **inverters**.
**SM6A23NSUB-VB** is a single N-channel **MOSFET** in **TO251** package. It has a **650V** high drain-source voltage (VDS), suitable for power control and switching applications that require higher voltage tolerance. The maximum gate-source voltage of the device is **±30V**, and the threshold voltage (Vth) is **3.5V**, ensuring that it can achieve switching operation under appropriate gate drive voltage. With **950mΩ** on-resistance (RDS(ON) @VGS=10V), although its switching efficiency is slightly lower than that of MOSFETs with lower on-resistance, it can still provide sufficient performance for general power switching applications. Its maximum drain current is **5A**, which makes it perform well in the medium power range.
Using **SJ_Multi-EPI** technology, this MOSFET provides superior electrical performance, can effectively control switching losses and heat generation, and is suitable for multiple high-voltage applications. Its high withstand voltage characteristics make it widely used in high-power systems such as **industrial power supplies**, **power tools**, **battery management** and **inverters**.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 650V | 3.5V | 5A | 950mΩ | SJ_Multi-EPI |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 650V | 3.5V | 5A | SJ_Multi-EPI |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 650V | 3.5V | 5A | SJ_Multi-EPI |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO251 | Single-N |
SM6A23NSUB-VB Detailed parameter description
- **Package**: TO251
- **Device type**: Single N-channel MOSFET
- **Maximum drain-source voltage (VDS)**: 650V
- **Maximum gate-source voltage (VGS)**: ±30V
- **Threshold voltage (Vth)**: 3.5V
- **On-resistance (RDS(ON))**:
- **RDS(ON) @ VGS = 10V**: 950mΩ
- **Maximum drain current (ID)**: 5A
- **Technology**: SJ_Multi-EPI technology
- **Application areas**: Power conversion, inverters, power tools, battery management systems, industrial control
- **Package**: TO251
- **Device type**: Single N-channel MOSFET
- **Maximum drain-source voltage (VDS)**: 650V
- **Maximum gate-source voltage (VGS)**: ±30V
- **Threshold voltage (Vth)**: 3.5V
- **On-resistance (RDS(ON))**:
- **RDS(ON) @ VGS = 10V**: 950mΩ
- **Maximum drain current (ID)**: 5A
- **Technology**: SJ_Multi-EPI technology
- **Application areas**: Power conversion, inverters, power tools, battery management systems, industrial control
Domain and module applications：
SM6A23NSUB-VB application areas and module examples
1. **Power conversion system**:
Due to the high withstand voltage and stable switching characteristics of the SM6A23NSUB-VB, it is very suitable for power management applications such as **AC-DC converters** and **DC-DC converters**. In these systems, MOSFETs can handle high voltages and perform high-efficiency power conversion, especially in power systems with high-voltage inputs, such as industrial power supplies and home appliance power supplies.
2. **Inverter applications**:
SM6A23NSUB-VB has excellent withstand voltage performance and is very suitable for use as a switching element in applications such as **solar inverters**, **UPS (uninterruptible power supply)**, and **electric vehicle inverters**. Its 650V drain-source voltage can meet the high voltage requirements of the inverter system while providing stable current control to improve system reliability and efficiency.
3. **Power tools and appliances**:
In the drive systems of **power tools** and **home appliances**, the SM6A23NSUB-VB can be used for **motor control** and **load switching**. It can effectively switch, especially suitable for **high-voltage battery-powered devices**, such as battery management and energy conversion in power tools. Its relatively high RDS(ON) is suitable for such occasions with low power requirements, providing a good balance of performance and cost.
4. **Battery Management System (BMS)**:
In the **battery management system**, the SM6A23NSUB-VB can serve as a key current switching element, responsible for switching control during battery charging and discharging. Due to its high voltage resistance and stability, this MOSFET can provide necessary support in functions such as battery protection, overcurrent, and short-circuit protection to ensure safe operation of the battery and extend the battery life.
5. **Industrial Control and High-Voltage Switches**:
The high withstand voltage characteristics of SM6A23NSUB-VB make it widely used in **industrial automation control systems**. It can be used in **high-voltage switchgear** and **motor control systems** to help achieve precise switch control, optimize energy management, reduce energy consumption and improve equipment efficiency.
1. **Power conversion system**:
Due to the high withstand voltage and stable switching characteristics of the SM6A23NSUB-VB, it is very suitable for power management applications such as **AC-DC converters** and **DC-DC converters**. In these systems, MOSFETs can handle high voltages and perform high-efficiency power conversion, especially in power systems with high-voltage inputs, such as industrial power supplies and home appliance power supplies.
2. **Inverter applications**:
SM6A23NSUB-VB has excellent withstand voltage performance and is very suitable for use as a switching element in applications such as **solar inverters**, **UPS (uninterruptible power supply)**, and **electric vehicle inverters**. Its 650V drain-source voltage can meet the high voltage requirements of the inverter system while providing stable current control to improve system reliability and efficiency.
3. **Power tools and appliances**:
In the drive systems of **power tools** and **home appliances**, the SM6A23NSUB-VB can be used for **motor control** and **load switching**. It can effectively switch, especially suitable for **high-voltage battery-powered devices**, such as battery management and energy conversion in power tools. Its relatively high RDS(ON) is suitable for such occasions with low power requirements, providing a good balance of performance and cost.
4. **Battery Management System (BMS)**:
In the **battery management system**, the SM6A23NSUB-VB can serve as a key current switching element, responsible for switching control during battery charging and discharging. Due to its high voltage resistance and stability, this MOSFET can provide necessary support in functions such as battery protection, overcurrent, and short-circuit protection to ensure safe operation of the battery and extend the battery life.
5. **Industrial Control and High-Voltage Switches**:
The high withstand voltage characteristics of SM6A23NSUB-VB make it widely used in **industrial automation control systems**. It can be used in **high-voltage switchgear** and **motor control systems** to help achieve precise switch control, optimize energy management, reduce energy consumption and improve equipment efficiency.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
