中文
English
RUH4060K-VB Product details
Back to previous pageProduct introduction：
RUH4060K-VB Product Introduction
**RUH4060K-VB** is an **N-Channel MOSFET** using **Trench technology** and is packaged in **TO251**. It has a **VDS** (drain-source voltage) of **40V**, which is suitable for high-current drive circuits, especially in medium and low voltage applications. The **RDS(ON)** of this MOSFET at **VGS = 10V** is only **13mΩ**, ensuring very low conduction losses and capable of supporting high current operating capabilities up to **55A**. Its low **RDS(ON)** and lower **Vth** (1.8V) enable it to perform well in a variety of circuit designs requiring high performance and small size, and is widely used in power management, automotive electronics, industrial drives and other high power density fields.
**RUH4060K-VB** is an **N-Channel MOSFET** using **Trench technology** and is packaged in **TO251**. It has a **VDS** (drain-source voltage) of **40V**, which is suitable for high-current drive circuits, especially in medium and low voltage applications. The **RDS(ON)** of this MOSFET at **VGS = 10V** is only **13mΩ**, ensuring very low conduction losses and capable of supporting high current operating capabilities up to **55A**. Its low **RDS(ON)** and lower **Vth** (1.8V) enable it to perform well in a variety of circuit designs requiring high performance and small size, and is widely used in power management, automotive electronics, industrial drives and other high power density fields.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 40V | 1.8V | 55A | 13mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 40V | 1.8V | 55A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO251 | Single-N | 40V | 1.8V | 55A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO251 | Single-N |
RUH4060K-VB Detailed parameter description
- **Package**: TO251
- **Configuration**: Unipolar N-Channel
- **Drain-source voltage (VDS)**: 40V
- **Gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 1.8V
- **On-resistance (RDS(ON))**:
- 14mΩ at VGS = 4.5V
- 13mΩ at VGS = 10V
- **Maximum drain current (ID)**: 55A
- **Technology**: Trench technology
- **Application areas**:
- Power management and DC-DC converters
- Automotive electronics and motor drives
- High power switches and battery management
- Wireless chargers and portable power supplies
- Industrial Automation Equipment
- **Package**: TO251
- **Configuration**: Unipolar N-Channel
- **Drain-source voltage (VDS)**: 40V
- **Gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 1.8V
- **On-resistance (RDS(ON))**:
- 14mΩ at VGS = 4.5V
- 13mΩ at VGS = 10V
- **Maximum drain current (ID)**: 55A
- **Technology**: Trench technology
- **Application areas**:
- Power management and DC-DC converters
- Automotive electronics and motor drives
- High power switches and battery management
- Wireless chargers and portable power supplies
- Industrial Automation Equipment
Domain and module applications：
Application Examples
1. **Power Management and DC-DC Converters**:
RUH4060K-VB has significant advantages in **DC-DC converters** and power management systems, especially in applications requiring high efficiency, such as portable devices, power tools, battery-powered systems, etc. Its low **RDS(ON)** (13mΩ) can minimize power loss during the conversion process and improve conversion efficiency, especially for applications that require high efficiency and low heat generation in power modules.
2. **Automotive Electronics and Motor Drives**:
In automotive electronics applications, RUH4060K-VB can be used in **motor drives** and **battery management systems**. Its high **ID** (55A) and **low RDS(ON)** characteristics enable it to handle high current loads and provide efficient power conversion in vehicle systems. In electric vehicles (EV) and hybrid electric vehicles (HEV), it can be used to drive motors, achieve efficient power conversion, or be used as a switching element in battery management systems to ensure efficiency and stability during battery charging and discharging.
3. **High-power switch and battery management**:
RUH4060K-VB is also very suitable for **wireless chargers**, **portable power supplies** and other fields. Through its low on-resistance, it can reduce power loss and improve battery charging efficiency, extend battery life, and ensure that wireless charging devices and portable power supplies operate at high efficiency.
4. **Industrial automation equipment**:
In **industrial automation**, RUH4060K-VB is suitable for motor control, sensor drive and other high-current load control scenarios. Its low on-resistance and high **ID** support large current processing, which can meet the needs of industrial automation equipment for high-performance MOSFETs, especially in equipment that requires high efficiency and high stability, which can effectively improve the reliability and work efficiency of the system.
5. **Solar inverter and power control system**:
In **solar inverter** and **power control system**, RUH4060K-VB can be used as a key switching element, responsible for the conversion and control of high voltage and high current. Low **RDS(ON)** improves the conversion efficiency of the inverter, reduces heat loss, and helps to improve the performance and reliability of the entire photovoltaic power generation system.
1. **Power Management and DC-DC Converters**:
RUH4060K-VB has significant advantages in **DC-DC converters** and power management systems, especially in applications requiring high efficiency, such as portable devices, power tools, battery-powered systems, etc. Its low **RDS(ON)** (13mΩ) can minimize power loss during the conversion process and improve conversion efficiency, especially for applications that require high efficiency and low heat generation in power modules.
2. **Automotive Electronics and Motor Drives**:
In automotive electronics applications, RUH4060K-VB can be used in **motor drives** and **battery management systems**. Its high **ID** (55A) and **low RDS(ON)** characteristics enable it to handle high current loads and provide efficient power conversion in vehicle systems. In electric vehicles (EV) and hybrid electric vehicles (HEV), it can be used to drive motors, achieve efficient power conversion, or be used as a switching element in battery management systems to ensure efficiency and stability during battery charging and discharging.
3. **High-power switch and battery management**:
RUH4060K-VB is also very suitable for **wireless chargers**, **portable power supplies** and other fields. Through its low on-resistance, it can reduce power loss and improve battery charging efficiency, extend battery life, and ensure that wireless charging devices and portable power supplies operate at high efficiency.
4. **Industrial automation equipment**:
In **industrial automation**, RUH4060K-VB is suitable for motor control, sensor drive and other high-current load control scenarios. Its low on-resistance and high **ID** support large current processing, which can meet the needs of industrial automation equipment for high-performance MOSFETs, especially in equipment that requires high efficiency and high stability, which can effectively improve the reliability and work efficiency of the system.
5. **Solar inverter and power control system**:
In **solar inverter** and **power control system**, RUH4060K-VB can be used as a key switching element, responsible for the conversion and control of high voltage and high current. Low **RDS(ON)** improves the conversion efficiency of the inverter, reduces heat loss, and helps to improve the performance and reliability of the entire photovoltaic power generation system.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
