Product introduction：
Product Introduction
P2804BTG-VB is a single N-channel MOSFET in a TO220 package, designed for high-performance applications. The device has a maximum drain-source voltage (VDS) of 40V, suitable for a variety of medium and high voltage circuits. Its gate-source voltage (VGS) range is ±20V, allowing flexible drive design. The threshold voltage (Vth) is 2.5V, allowing it to be turned on smoothly at a lower drive voltage. This MOSFET has an extremely low on-resistance in the on state, with RDS(ON) of 7mΩ@VGS=4.5V and 6mΩ@VGS=10V, respectively, which significantly reduces power loss and thus improves overall energy efficiency. The maximum drain current (ID) is 110A, ensuring that it can operate stably under harsh conditions.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| TO220 |
Single-N |
40V |
|
2.5V |
110A |
|
|
6mΩ |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| TO220 |
Single-N |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| TO220 |
Single-N |
40V |
|
2.5V |
110A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| TO220 |
Single-N |
40V |
|
2.5V |
110A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| TO220 |
Single-N |
|
|
|
|
|
|
|
Detailed parameter description
- **Model**: P2804BTG-VB
- **Package**: TO220
- **Configuration**: Single N-channel
- **Maximum drain-source voltage (VDS)**: 40V
- **Maximum gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 2.5V
- **On-resistance (RDS(ON))**:
- 7mΩ @ VGS=4.5V
- 6mΩ @ VGS=10V
- **Maximum drain current (ID)**: 110A
- **Technology**: Trench
Domain and module applications：
Application fields and modules
P2804BTG-VB MOSFET is widely used in many fields and modules, including:
1. **Power management**: Suitable for switching power supplies and DC-DC converters, it can achieve efficient power conversion, reduce heat generation, and improve system reliability.
2. **Motor drive**: In motor control applications, P2804BTG-VB can be used as a high-power switch to ensure the stability of the motor during fast start-stop and speed regulation.
3. **Automotive electronics**: It can be used in battery management systems, electric power steering systems, etc. to improve energy efficiency and response speed and enhance the overall performance of the vehicle.
4. **Renewable energy**: In solar inverters and wind power generation systems, it provides efficient energy conversion and optimizes the overall efficiency of the system.
Through applications in these fields, P2804BTG-VB can help designers achieve efficient and reliable electrical solutions.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
