中文
English
LI2910-VB Product details
Back to previous pageProduct introduction：
LI2910-VB MOSFET Product Introduction
LI2910-VB is a high-performance N-channel MOSFET that uses advanced Trench technology and is designed to meet the needs of high voltage and high current applications. Its package type is TO220F, which not only provides excellent heat dissipation performance, but also makes it more convenient during installation. The maximum drain-source voltage (VDS) of LI2910-VB is 100V, and it can carry a continuous drain current of up to 50A, making it suitable for a variety of high-power circuits. Its on-resistance (RDS(ON)) at VGS = 10V is 34mΩ, which greatly reduces energy loss and heat generation, and improves the overall efficiency of the system.
LI2910-VB is a high-performance N-channel MOSFET that uses advanced Trench technology and is designed to meet the needs of high voltage and high current applications. Its package type is TO220F, which not only provides excellent heat dissipation performance, but also makes it more convenient during installation. The maximum drain-source voltage (VDS) of LI2910-VB is 100V, and it can carry a continuous drain current of up to 50A, making it suitable for a variety of high-power circuits. Its on-resistance (RDS(ON)) at VGS = 10V is 34mΩ, which greatly reduces energy loss and heat generation, and improves the overall efficiency of the system.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 100V | 1.8V | 50A | 34mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 100V | 1.8V | 50A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO220F | Single-N | 100V | 1.8V | 50A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO220F | Single-N |
Detailed parameters of LI2910-VB
- **Package**: TO220F
- **Configuration**: Single N-channel
- **VDS (drain-source voltage)**: 100V
- **VGS (gate-source voltage)**: ±20V
- **Vth (gate threshold voltage)**: 1.8V
- **RDS(ON) (on-resistance)**: 34mΩ @ VGS = 10V
- **ID (continuous drain current)**: 50A
- **Technology**: Trench
- **Package**: TO220F
- **Configuration**: Single N-channel
- **VDS (drain-source voltage)**: 100V
- **VGS (gate-source voltage)**: ±20V
- **Vth (gate threshold voltage)**: 1.8V
- **RDS(ON) (on-resistance)**: 34mΩ @ VGS = 10V
- **ID (continuous drain current)**: 50A
- **Technology**: Trench
Domain and module applications：
Examples of LI2910-VB applications in different fields and modules
1. **Power converter**: LI2910-VB is used as the main switching element in switching power supplies and DC-DC converters. Due to its high voltage and high current handling capabilities, it can improve conversion efficiency while reducing power loss, and is suitable for power management systems in industrial power supplies and consumer electronics.
2. **Motor drive**: This MOSFET can be widely used in motor control systems, such as brushless DC motor (BLDC) drivers. It can effectively control the start, run and stop of the motor, ensuring efficient power conversion and low heat generation, and is suitable for use in power tools, home appliances and electric vehicles.
3. **Battery management system**: In battery charging and management applications, LI2910-VB is suitable as a switching element for chargers. Its high current carrying capacity and low on-resistance enable it to efficiently manage the battery charging and discharging process, ensuring battery safety and stability, and is widely used in charging systems for mobile devices and electric vehicles.
4. **Power Amplifier**: In communications and audio amplifiers, the LI2910-VB can be used as a switching element in the output stage to support the transmission of high-power signals. Its low on-resistance and good thermal management characteristics make it suitable for use in high-performance audio equipment, RF amplifiers, and signal processing systems.
Through these applications, the LI2910-VB MOSFET plays an important role in modern power electronics design, supporting the development of various high-efficiency power supplies and control technologies.
1. **Power converter**: LI2910-VB is used as the main switching element in switching power supplies and DC-DC converters. Due to its high voltage and high current handling capabilities, it can improve conversion efficiency while reducing power loss, and is suitable for power management systems in industrial power supplies and consumer electronics.
2. **Motor drive**: This MOSFET can be widely used in motor control systems, such as brushless DC motor (BLDC) drivers. It can effectively control the start, run and stop of the motor, ensuring efficient power conversion and low heat generation, and is suitable for use in power tools, home appliances and electric vehicles.
3. **Battery management system**: In battery charging and management applications, LI2910-VB is suitable as a switching element for chargers. Its high current carrying capacity and low on-resistance enable it to efficiently manage the battery charging and discharging process, ensuring battery safety and stability, and is widely used in charging systems for mobile devices and electric vehicles.
4. **Power Amplifier**: In communications and audio amplifiers, the LI2910-VB can be used as a switching element in the output stage to support the transmission of high-power signals. Its low on-resistance and good thermal management characteristics make it suitable for use in high-performance audio equipment, RF amplifiers, and signal processing systems.
Through these applications, the LI2910-VB MOSFET plays an important role in modern power electronics design, supporting the development of various high-efficiency power supplies and control technologies.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
