Product introduction：
1. K1062 Product Introduction
K1062 is a high-efficiency single N-channel MOSFET in a small SOT23-3 package, designed for space-constrained applications. Its maximum drain-source voltage (VDS) is 60V, suitable for medium-voltage switching circuits. K1062 has a low on-resistance (RDS(ON)). When the gate-source voltage is 4.5V, the on-resistance is 3100mΩ, and at 10V it is even lower at 2800mΩ. It can operate stably at a drain current of 0.3A. The threshold voltage (Vth) is 1.7V, ensuring that it turns on quickly under low-voltage drive. Using Trench technology, K1062 performs well in thermal management and current control, and is suitable for various low-power electronic products.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOT23-3 |
Single-N |
60V |
20（±V） |
1.7V |
0.3A |
|
|
2800mΩ |
|
II. Detailed parameter description of K1062
| Parameter| Value|
| ---------------- | ---------------------- |
| **Package type** | SOT23-3 |
| **Configuration** | Single N-channel|
| **Drain-source voltage** | 60V |
| **Gate-source voltage** | ±20V |
| **Threshold voltage** | 1.7V |
| **On-resistance** | 3100mΩ @ VGS=4.5V |
| **On-resistance** | 2800mΩ @ VGS=10V |
| **Drain current** | 0.3A |
| **Technology type** | Trench |
Domain and module applications：
III. Application fields and module examples
1. **Consumer electronics**
K1062 is widely used in various consumer electronics products, such as smartphones, tablets and portable audio. Due to its small package and low on-resistance, it can effectively improve the efficiency of battery-powered devices and extend battery life.
2. **Power management system**
In power management applications, K1062 is suitable for DC-DC converters and power adapters. The efficient switching characteristics of this MOSFET can optimize the energy conversion process, reduce heat loss, and enhance the reliability of the overall power system.
3. **LED lighting**
K1062 is also commonly used in LED driver circuits, which can efficiently control the brightness and switching of LEDs. Its low on-resistance helps to improve the energy efficiency of LED driver circuits, thereby extending the service life of LED lighting systems.
4. **Automotive electronics**
In the field of automotive electronics, K1062 can be used to drive and control low-power devices, such as car audio, sensors, etc. Its stability and high efficiency ensure the normal operation of automotive electronic systems and improve the safety and comfort of vehicles.
5. **Industrial Automation**
K1062 is also suitable for control modules of industrial automation equipment. Its good thermal performance and current carrying capacity enable it to work stably in complex industrial environments and provide reliable support for various automation controls.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
