中文
English
IRFR210BTM-VB Product details
Back to previous pageProduct introduction：
1. IRFR210BTM-VB Product Introduction
IRFR210BTM-VB is a high voltage N-channel MOSFET in TO252 package, designed based on Trench technology. This MOSFET has a maximum drain-source voltage (VDS) of 200V and a maximum drain current (ID) of 5A. Its on-resistance (RDS(ON)) is 850mΩ, which is suitable for applications that require high voltage but lower current. IRFR210BTM-VB is suitable for power management, switching applications and motor control, and can work stably in high voltage environments.
IRFR210BTM-VB is a high voltage N-channel MOSFET in TO252 package, designed based on Trench technology. This MOSFET has a maximum drain-source voltage (VDS) of 200V and a maximum drain current (ID) of 5A. Its on-resistance (RDS(ON)) is 850mΩ, which is suitable for applications that require high voltage but lower current. IRFR210BTM-VB is suitable for power management, switching applications and motor control, and can work stably in high voltage environments.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 200V | 3V | 5A | 850mΩ | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 200V | 3V | 5A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 200V | 3V | 5A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N |
2. IRFR210BTM-VB Detailed parameter description
- **Package type**: TO252
- **Polarity**: N-channel
- **Maximum drain-source voltage (VDS)**: 200V
- **Maximum gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 3V
- **On-resistance (RDS(ON))**: 850mΩ @ VGS = 10V
- **Maximum drain current (ID)**: 5A
- **Technology**: Trench
- **Power consumption**: Maximum 35W
- **Operating temperature range**: -55°C to 175°C
- **Gate charge (Qg)**: Typical 60nC
- **Input capacitance (Ciss)**: 500pF
- **Reverse recovery charge (Qrr)**: 20nC typical
- **Typical switching frequency**: above 50kHz
- **Package type**: TO252
- **Polarity**: N-channel
- **Maximum drain-source voltage (VDS)**: 200V
- **Maximum gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: 3V
- **On-resistance (RDS(ON))**: 850mΩ @ VGS = 10V
- **Maximum drain current (ID)**: 5A
- **Technology**: Trench
- **Power consumption**: Maximum 35W
- **Operating temperature range**: -55°C to 175°C
- **Gate charge (Qg)**: Typical 60nC
- **Input capacitance (Ciss)**: 500pF
- **Reverse recovery charge (Qrr)**: 20nC typical
- **Typical switching frequency**: above 50kHz
Domain and module applications：
3. Applications and modules
The high voltage handling capability and relatively low on-resistance of the IRFR210BTM-VB make it excellent in many application areas, especially where high voltage and medium current are required. The following are its main application areas:
1. **Power management**
In power management applications, such as DC-DC converters and voltage regulator circuits, the IRFR210BTM-VB can effectively handle high voltages while maintaining a relatively low on-resistance. Although its maximum drain current is low, its high voltage capability and stability enable it to handle complex voltage management tasks in power modules.
2. **Switching applications**
The IRFR210BTM-VB can be used in a variety of switching applications, including switching power supplies and load switches. In these applications, it can reliably switch switches at high voltages, control current flow, and reduce power consumption and heat in the circuit.
3. **Motor Control**
In some low-power motor control systems, especially those that require high voltage rather than high current, the IRFR210BTM-VB can provide effective switch control. Its high voltage capability makes it suitable for use in motor drive circuits, able to handle current fluctuations during motor start and stop.
4. **Industrial Control**
For switching applications that require high voltage in industrial control systems, the IRFR210BTM-VB provides a reliable choice. Its high voltage handling capability and low on-resistance enable it to stably control current in industrial equipment.
5. **Battery Management**
In battery management systems, the IRFR210BTM-VB can be used for switch control of high-voltage batteries. For example, it can be used to protect batteries from overcharge or overdischarge while effectively controlling current flow.
These application scenarios demonstrate the versatility and adaptability of the IRFR210BTM-VB in situations with high voltage and medium current requirements, ensuring reliability and efficiency in areas such as power management, motor control and industrial applications.
The high voltage handling capability and relatively low on-resistance of the IRFR210BTM-VB make it excellent in many application areas, especially where high voltage and medium current are required. The following are its main application areas:
1. **Power management**
In power management applications, such as DC-DC converters and voltage regulator circuits, the IRFR210BTM-VB can effectively handle high voltages while maintaining a relatively low on-resistance. Although its maximum drain current is low, its high voltage capability and stability enable it to handle complex voltage management tasks in power modules.
2. **Switching applications**
The IRFR210BTM-VB can be used in a variety of switching applications, including switching power supplies and load switches. In these applications, it can reliably switch switches at high voltages, control current flow, and reduce power consumption and heat in the circuit.
3. **Motor Control**
In some low-power motor control systems, especially those that require high voltage rather than high current, the IRFR210BTM-VB can provide effective switch control. Its high voltage capability makes it suitable for use in motor drive circuits, able to handle current fluctuations during motor start and stop.
4. **Industrial Control**
For switching applications that require high voltage in industrial control systems, the IRFR210BTM-VB provides a reliable choice. Its high voltage handling capability and low on-resistance enable it to stably control current in industrial equipment.
5. **Battery Management**
In battery management systems, the IRFR210BTM-VB can be used for switch control of high-voltage batteries. For example, it can be used to protect batteries from overcharge or overdischarge while effectively controlling current flow.
These application scenarios demonstrate the versatility and adaptability of the IRFR210BTM-VB in situations with high voltage and medium current requirements, ensuring reliability and efficiency in areas such as power management, motor control and industrial applications.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
