Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| TO220 |
Single-P |
-60V |
30V（±V） |
2V |
-80A |
|
15(mΩ) |
12(mΩ) |
Trench |
Detailed parameter description
- **Package**: TO220
- **Configuration**: Single-stage P-type
- **Drain-source voltage (VDS)**: -60V
- **Gate-source voltage (VGS)**: ±30V
- **Threshold voltage (Vth)**: 2V
- **On-resistance (RDS(ON))**:
- 15mΩ @ VGS=4.5V
- 12mΩ @ VGS=10V
- **Continuous drain current (ID)**: -80A
- **Technology**: Trench
Domain and module applications：
Application Examples
1. **High Power Power Switch**: VBM2611 is ideal for high power power switch applications such as DC-DC converters and AC-DC power adapters. Its low on-resistance and high current capability ensure efficient current handling, reduce power loss, and improve overall system efficiency.
2. **Motor Drive System**: In motor drive applications such as power tools, industrial automation, and electric vehicles, VBM2611 provides reliable switching performance and strong current handling capabilities to effectively control high current loads and cope with high power demands.
3. **Battery Management System (BMS)**: In battery management and protection systems, VBM2611's high current handling capability and low on-resistance can effectively ensure safe battery charging and discharging, preventing overcurrent and reverse current from damaging the battery.
4. **Inverter and Uninterruptible Power Supply (UPS)**: VBM2611 is suitable for inverter and UPS systems, and can stably handle high power loads. Its excellent thermal management performance and low on-resistance improve the efficiency and stability of the system, ensuring reliability during power conversion.
5. **High-power audio amplifier**: In high-power audio amplifier applications, VBM2611 provides stable switching performance and low on-resistance, helping to reduce signal distortion and heat generation, thereby achieving clear audio output.
These application examples demonstrate the wide applicability of VBM2611 in the fields of high power and high efficiency, reflecting its important value in modern electronic design.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
