AFP2367SS23RG-VB is a P-Channel field effect transistor of VBsemi brand. The specific parameters are as follows: - Package: SOT23 - Maximum operating voltage: -20V - Maximum current: -4A - RDS(ON): 57mΩ @ VGS=4.5V, VGS=12V - Threshold voltage: Vth=-0.81V
**Application introduction:** Suitable for circuits and modules that require P-Channel MOSFET, especially where lower impedance and smaller threshold voltage are required.
**Example application:** 1. **Power management module:** Due to low impedance and moderate current capacity, it is suitable for power switch and regulation modules.
2. **LED driver:** In LED driver circuits that require reverse control, AFP2367SS23RG-VB can be used.
3. **Battery protection circuit:** Due to the small SOT23 package and low threshold voltage, it is suitable for battery protection circuit to ensure that the battery is cut off in low voltage state.
Please note that the specific application needs to be verified according to the electrical requirements and design parameters of the project.
* If you need to request samples from our company, please fill out the form and submit it. We will respond within 24 hours.
X
SN Check
***Serial Number Lookup Prompt**
1. Enter the complete serial number, including all letters and numbers.
2. Click Submit to proceed with verification.
The system will verify the validity of the serial number and its corresponding product information to help you confirm its authenticity.
If you notice any inconsistencies or have any questions, please immediately contact our customer service team. You can also call 400-655-8788 for manual verification to ensure that the product you purchased is authentic.